Start with 1 1/4" turn out on each of the H and L adjustment screws.
Should be set at 0.015" to 0.016" gap
It is 306, exactly as in the question.It is 306, exactly as in the question.It is 306, exactly as in the question.It is 306, exactly as in the question.
1 x 306 = 306 2 x 153 = 306 3 x 102 = 306 6 x 51 = 306 9 x 34 = 306 17 x 18 = 306
10% of 306 = 10% * 306 = 0.1 * 306 = 30.6
45% of 306= 45% * 306= 0.45 * 306= 137.7
306 + 25% = 306*1.25 = 382.5
306/1
17% of 306 =52.02= 17%/100% * 306= 17/100 * 306= 0.17 * 306= 52.02
There are many answers to this question, here are a few 1 x 306 = 306 2 x 153 = 306 10 x 36 = 306 20 x 18 = 306
306 - 147 = 159
306 = CCCVI
306-147 = 159