In the USA, 15mm is half-inch, and 22mm is three-quarters inch. Lengths of pipe nipples in these sizes range from one and a quarter/one and a half, to six inches, in half-inch increments.
Slab 15mm
17mm spanner
the wall thickness of sch 40 - 500mm dia pipe is 15mm or 16mm.
cement require for 1 sqm plaster 1:2 for 15mm thickness
100 kw is the power drawn by the load. to calculate the cable size you need to know the voltage. From that you can calculate the current. this decides the cable size. for example if the voltage is 400Volts then the current flowing in the circuit when the load is 100 KW will be 250 amps. (100,000/400). for 250 amps to flow with out causing excessive heating of the cable the cross sectional area of the copper cable should be 150 sq mm.for a round cross section the diameter will be roughly 15mm.
15 cm is longer.
The given dimensions are incorrect for it to be a square because a square has 4 equal sides and its area in square units is: a side times a side.
A standard CD:- 15mm Internal diameter, 120mm external diameter, 1.1 mm thick A mini CD:- 15mm Internal diameter, 80mm external diameter, 1.1 mm thick
15mm beads is =- to how many gm?
15mm = 0.000015km
15mm (millimeters) is about 0.6 inch.
15mm is the same as about 0.6 inches.
If you mean that 15mm is the diameter, then the circumference will be 47.1mm
15mm is 1.5cm (divide mm by 10).
3 x 5 x m x m = 15mm
15mm=1.5cm. 1.5cm=0.015m So, 15mm = 0.015m
% rate = 15mm/10mm * 100% = 150%