Device codes on televisions are used for communications between the television and the remote control. The codes are used to setup and change channels.
To access codes for Pyle TV, you typically need to refer to the user manual or the official Pyle website for specific product codes. These codes can include setup codes for remote controls or troubleshooting codes for device connectivity. If you're looking for a specific code, please specify the model or type of device you're inquiring about.
The support person at Hisense gave me the device code of 748 The support person at Bell Expressvu gave me the device code of 759. The Hisense web site as follows; supplies me with device codes 178, 10019, 505 and 627 depending on your provider none of these seem to work on my lcd40v57ca tv. If they work on yours let me know.
According to iSymphony customer service, they advised to try all of the available Samsung codes for the remote you are trying to program.
To program a Dish Network remote to control a Cielo device, you typically need the specific TV code for Cielo. Commonly used codes include 10178, 10179, and 10180, but these can vary based on the remote model. You can find the exact code by accessing the Dish Network remote setup menu and selecting the appropriate device type. If the codes don’t work, consult the Dish Network website or user manual for additional assistance.
One device that is used to show a film might include a film projector. Another device that is used to show a film might be a DVD player or a television.
To find the correct codes for a Coby television for use with a Newstar NTR-61 remote, you can refer to the remote's user manual, which typically lists compatible device codes. Alternatively, you can try common codes for Coby TVs, such as 0031, 0046, or 0050. If these codes don't work, consider using the code search function on the remote to find the appropriate code.
a tv remote used to change channels
Through RS232 interface one can connect to service menu and diagnose/configure the device, same applies to service IR codes. I have come across this in televisions.
The remote control code for an iLive IT082B device when using a Cox remote can vary, but commonly used codes include 301, 302, and 303. To program your Cox remote, press the "TV" button, followed by "Setup," and then enter the code. If the device turns off, the code is correct. If not, you may need to try different codes until you find one that works.
The 2 codes that I used and worked for Direct TV was "10178 and 10179" they worked great for me and I hope they work for you :)
Here are the codes for APEX TVs: 757, 744, 595, 118, 743, 618, or 005.Here are the instructions for programming the remote to you TV:Address Remote to TV/Other DevicesWhile at the device location (TV, etc), point the remote at the device. Press and hold the device button on the remote (TV, Aux, etc). - All four mode buttons should light upEnter the three-digit remote control code - The mode button (TV, Aux, etc.)you selected should light upPress the Pound (#) button - The mode button you are programming should flash three timesPress the large, red POWER button - The device should turn off
You can program without having the codes by following these steps: 1. Turn on the TV (or other device). 2. Press and hold CODE SEARCH until light stays lit; release. 3. Press TV button. 4. Press POWER button repeatedly until TV turns off. 5. Press Enter. Repeat for each device. These instructions are found on the inside of the battery cover.