0
What are the device to connect the same four PC's to a cable modem?
Wiki User
∙ 13y ago
Ethernet cables.
What do you mean by "same 4 PCs"? if you mean connection them into the same port, you would need a splitter, if you mean connecting them into 4 individual ports, then use 4 individual Ethernet cables.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How much does it cost to connect four PCs to a cable modem?
Not necessarily more than the price of a hub, or a router with four extra slots. Check at any PC store for a hub or router.
How do I connect 2 computers to the internet when my modem has only 1 plug for the Ethernet cable?
plug the ethernet cable into a 'router'. there will be several ports on the router to direct signal to each computer - usually four ports on a typical D-Link or Linksys router.
How to setup Bsnl broadband sharing on four PC. I have a teracom company broadabnd modem?
A modem can only support one device for internet connection.
What two cables connect to the hard disk?
There are two cables that connect to the floppy drive in a desktop computer.There is a four pin power cableThere is a ribbon cable that has a part twisted end (the twisted end connects to the floppy drive).
10 computers how many ways to connect to the internet?
There are two general ways that someone can connect to the internet, either by wired broadband or wireless broadband. Examples of a wired broadband connections are by dial-up or cable. Examples of wireless broadband connections are by Wi-Fi or satellite.
Can a modem either DSL Cable style also be a router and why?
a modem takes cable input and output goes to only 1 Ethernet cable. A router takes the 1 Ethernet cable and makes it so that you can hook up four or five Ethernet cables. a wireless router allows you to hook up 4 or 5 Ethernet cables and unlimited amounts of wireless receivers. If you only have 1 computer, you don't need a router. You only need 1 Ethernet cable. To put it in simple terms : Yes, many newer external modems have full router and firewall functionality built-in to a single device
How do you hook a broadband linksys wireless router to your cable modem?
You'll probably need to plug the cable modem to the cable line. Then plug an ethernet cable from the modem to the WAN port on the router. Then connect each of your computers (via ethernet cable) to the router.
What are the 4 facilities needed to connect the internet?
1) PC 2) Modem 3)Telephone line 4)Browsing software.
What devices are required to connect 4 PCs to a cable modem and provide a hardware firewall?
You need a router, four cables in the case of wired network or four wireless cards (laptops don't need it because they have it). Plus a hardware firewall which can cost couple hundred dollars. Usually firewalls inside of routers are pretty good (in good routers) and it's not easy at all to hack it.
When did Connect Four happen?
Connect Four happened in 1974.
When is a straight through cable used and when is a crossover cable used?
You need a crossover cable you want to connect two computers without a switch. If you want to use more than two computers (with switch) you have to use a straight pair cable. ---- Ethernet (up to 100 Mbit) communicates on four of the eight wires available. Two of the wires are used to transmit data, and two are to receive. Wires 1 and 2 transmit while wires 3 and 6 receive. With this in mind, on a straight through cable the wires are in the same position on both ends of the cable. On a crossover cable the wire that is in position one connects to position three on the other side, and the wire in position two connects to position six on the other end. Straight Cross 1---------------1 1------------3 2---------------2 2------------6 3---------------3 3------------1 6----------------6 6-------------2
How do you connect to the Internet Backbone?
To get online you need to buy an internet connection. You must plug your internet cable into a router. Then you must have connection to the router, most computers will automatically connect to the internet if the hardware is in place.
