0
What are the disadvantages of aluminum over steel as a reinforcement bar?
Wiki User
∙ 13y ago
They are too numerous to mention!
Steel embedded in concrete is protected from corrosion by the high alkali content of concrete. New concrete is 13-13.2 pH when poured. The chemical reaction that takes place between the concrete and steel forms what is called a 'Passivating Layer' on the steel. This layer, kept intact will prevent rust from occurring on the steel. Google, passivating layer and read.
It is very important to keep this high pH during a concrete structures life. One way this is done is to waterproof the concrete.
Aluminum doesn't share this characteristic and corrodes quite easily when placed in concrete. This why, if an Aluminum railing post is to be embedded in a concrete a core is extracted, an appropriate filler material is placed in the hole, then the Aluminum is inserted. Filler materials [usually an epoxy] isolate the Aluminum from contact with the concrete and also prevent electrical currents from flowing.
If aluminum is IN the concrete, Dissimilar metal corrosion begins day one between steel and aluminum. In short order the aluminum will be a powder. Steel cost less, easier to work with and can be welded conventionally on site.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What is cast aluminum?
What is Cast Aluminum?Cast aluminum is a very broad term because there are several manufacturing types to casting such as sand casting, investment casting, gravity casting and high pressure die casting. Aluminum produced as castings comes in many alloys.How does hard water effect the cast aluminum heat exchanger in a boiler?Hard water can produce an oxide in an aluminum heat exchanger. Depending on the aluminum alloy and how much iron is in the alloy, there could be corrosion. Some aluminum alloys such as A413 and A360 would work better as a die casting.Which is a better heat exchanger for residential use, cast aluminum or stainless steel?As a heat exchanger, aluminum could work better than steel because of the temp transfer abilities over steel. Stainless steel will not corrode.
What is the different in physical properties between titanium and aluminum?
Titanium is about 60% heavier than aluminum, but it is over twice as strong. So, for a given part design, one made out of titanium can be made with a thinner section area so that it is both stronger and lighter than the a similarly functioning part made out aluminum. Also, titanium (along with steel) can be made to have an infinite fatigue life (unlike aluminum, which will always fatigue eventually). WOT
What is a raft foundation?
1. Excavation of the soil up to required depth.2. Ramming the foundation bed.3. Cutting the concrete over the reinforcement.4. Laying the reinforcement over the the foundation bed.5. Pouring the cement concrete over the reinforcement.
How can you fit an over sized steel rod into a small steel washer?
by heating washer
What is result of more reinforcements used in structure?
The structure is called a over reinforced concrete or structure. The structure can fail without warning. Discuss why managers she would always t ry to use positive reinforcement instead of negative reinforcement
Which reinforcement is safe under or over reinforcement?
Under reinforcement is safe because in this case steel fails before concrete.
What is a bike wheel made of over all?
Rubber tire and tube, plastic rim strip, aluminum rim, brass nipples, stainless steel spokes, aluminum hub body, steel bearings and axle.
Livestock Trailers: Aluminum or Steel?
When you are considering a new trailer for your livestock, there are a ton of questions and options to consider before you buy. What type of flooring should you get, what type of wiring, what type of wall construction, is there a warranty, is the trailer safe, how much is this going to cost me, is my trailer going to last me for a while? All of these are great questions, but none of them are as important as whether or not to choose a steel or aluminum trailer. Choosing steel or aluminum is a huge decision when choosing your livestock trailer. There are advantages and disadvantages to each. Let us take a look at a few of the advantages and disadvantages of each type of livestock trailer: Aluminum One of the biggest factors in choosing aluminum vs. steel is rust and corrosion. Aluminum has a huge advantage over steel in this scenario because the odds are much better for steel to corrode than aluminum. While even with aluminum you are going to have some routine maintenance and upkeep, it will be much less than what the steel will represent. If you want a rusty trailer or honestly just don’t care what your trailer looks like, than steel may be for you, but if you are concerned about looks you probably have already made your decision. Aluminum trailers are also easier to haul, get better gas mileage, and are sleeker than your average steel trailer. Steel As you probably have already figured out, the only real main advantage of a steel trailer is price. You are far more likely to find a cheap steel trailer (especially if you are buying used), than if you are to find a cheap aluminum trailer. For some, the price will be the deciding point, but just about every other argument goes in favor of aluminum. Whether you end up going with steel or aluminum, you are going to end up with a trailer that can get the job done. If you want something that looks nicer, pulls easier, and doesn’t rust as easily, than aluminum is the answer. If you are looking at price, than you may just want to stick with steel.
Is galvalume a type of coating for sheet steel?
Galvalume is a coating generally comprised of 55% zinc and 45% aluminum. It is used as a coating over steel. It is a common coating on steel metal roofing panels.
Which is better Steel or aluminum dive tanks?
Steel has been used as a tank material since the begining of scuba diving. Extremely durable and useful as a tank material but steel rusts. Buy a steel tank, assume that over the life of the tank it will cost you for a few tank tumbles to remove interior rust. Pay more for a steel tank than an aluminum one. Steel will last (almost) forever if you take care of it. There are steel tanks still in service today that were originally manufactured in the 50s. Aluminium tanks came out in the 70s. It's a softer material, the walls of aluminum tanks are thicker, making them a little larger than steel tanks of the same capacity. The big advantage of aluminum is that it doesn't rust and it's less-expensive than steel. You can find aluminum tanks cheap, for $100-150.
What is cast aluminum?
What is Cast Aluminum?Cast aluminum is a very broad term because there are several manufacturing types to casting such as sand casting, investment casting, gravity casting and high pressure die casting. Aluminum produced as castings comes in many alloys.How does hard water effect the cast aluminum heat exchanger in a boiler?Hard water can produce an oxide in an aluminum heat exchanger. Depending on the aluminum alloy and how much iron is in the alloy, there could be corrosion. Some aluminum alloys such as A413 and A360 would work better as a die casting.Which is a better heat exchanger for residential use, cast aluminum or stainless steel?As a heat exchanger, aluminum could work better than steel because of the temp transfer abilities over steel. Stainless steel will not corrode.
Which is heavier 1m3 of steel or 1m3 of aluminium?
A cubic meter of steel weighs almost 3 times more than a cubic meter of aluminum. Density of steel is 7.85 g/ cm3, aluminum is 2.7 g/ cm3
What benefits do a stainless-steel pressure cooker offer over an aluminum pressure cooker?
Stainless steel has the advantage of being the healthier, safer choice, as aluminum products have been linked to causing alzheimers. Steel products are extremely durable and will last for many years. Make sure to find one with a layered base of aluminum bonded to the outside of the pan to help conduct heat and therefore improve performance.
What is the main advantage of fiberglass grates over aluminum or steel grates?
Fiberglass can be a bit more durable then aluminum or steel. It is also much easier to work with and looks a lot better then the others. Fiberglass grates tend to be lighter than metal grates and may offer a better load capacity depending on the type of grate. They are inherently lighter as the material is designed to be lightweight whereas aluminum and steel grates are selected for their durability and reliability.
Did thay make a steel frame yz 125 05?
nope 2005 is when they changed over to a aluminum frame so an 05 06 07 08 09 11 12 are all aluminum frames
Is aluminum a good ground?
From a chemical standpoint, steel is a better thermal and electrical conductor than aluminum. Practically, however, aluminum's usefulness as a conductor is limited by its ease of oxidation. Since aluminum oxide greatly diminishes the conductivity of the aluminum over time, aluminum is not very suitable for use as a conductor in practical applications.
How do you separate aluminum soda cans and steel cans and milk jugs and soda bottles?
You can separate aluminum and steel by getting a magnet, and by putting it against the can and seeing if it sticks or not. I f it sticks, its steel. If it doesn't its aluminum. And well... milk jugs and soda bottles, you can clearly tell that soda bottles are bottles with soda in it, and milk jugs are jugs with milk in it.
