The Pirani gauge is base on a heating element that is cooled due to the thermal conduction of the measured gas. The heating elements resistance drops as the thermal conduction is increase i.e. more gas results in a drop in resistance. On the other hand less gas results in less conduction increased temperature of the heating element and increased measured resistance. This is a very robust gauge and is suitable for relatively high pressures, down to 10^-4 Torr. Below that you need a different gauge as the low number of gas molecules does not allow any measureable change.
one of the main drawbacks is that it is an eyesore. It standsd out and produces radiation. Hope this helps with your research. i'M SORRY IF IT WAS NO HELP
That depends on what you mean by "this".
The size gauge that can be compared to tat of a pencil is a 4 gauge.
Because Pressure gauge measures the the differenceof pressure so it is called pressure gauge not meter.
No its bigger. The smaller the gauge the thicker it is
pirani guage can measure upto 10^-3 torr pressure but penning guage can measure beyond this
it is used to measure the accurate pressure
Marcello Pirani died in 1968.
Marcello Pirani was born in 1880.
The Pirani gauge is a robust thermal conductivity gauge used for the measurement of the pressures in vacuum systems. This gauge is used to measure the pressure between 0.5 torr to 10-4 torr.
Frederick Pirani died on 1926-10-26.
Frederick Pirani was born on 1858-12-03.
Amina Pirani Maggi was born on January 15, 1892, in Verona, Veneto, Italy.
Amina Pirani Maggi died on November 10, 1979, in Rome, Lazio, Italy.
Mario Pirani has written: 'Il futuro dell'economia' -- subject(s): Competition, International, Economic forecasting, International Competition
It comes from the city of Piran in Croatia.
AdvantagesSignificantly better resolution in the range above 100 Torr. [5]The power consumption is drastically reduced compared to continuously operated Pirani gauges.The gauge's thermal influence on the real measurement is lowered considerably due to the low temperature threshold of 80°C and the ramp heating in pulsed mode.The pulsed mode allows for efficient implementation of modern microprocessor technology.It will useful up to 10^-4 torr.Disadvantages Increased calibration effortLonger heat-up phaseIt is not useful at low pressure(below 10^-4torr)