Want this question answered?
There is no such term as 'inductance reactance'; the correct term is 'inductive reactance'. This is the opposition to the flow of a.c. current, due to the inductance of the load, and the frequency of the supply, and is measured in ohms.Inductive reactance is directly proportional to both the supply frequency and the load's inductance.
It does not contain unidirectional outputAnswerA purely resistive circuit is an 'ideal' circuit that contains resistance, but not inductance or capacitance.
Resistive Load An electrical load which is characteristic of not having any significant inrush current. When a resistive load is energised, the current rises instantly to it's steady-state value, without first rising to a higher value. An electrical load in which voltage and current are converted to energy in the form of heat; i.e., an electrical heater, incandescent bulb. Inductive Load An electrical load which pulls a large amount of current (an inrush current) when first energized. After a few cycles or seconds the current "settles down" to the full-load running current. The time required for the curren to "settle down" depends on the frequency or/and the inductance value of the Inductive load
Dear actually it depend on its application. Where do you want to use them.. Compression Load Cell is considered as one of the best and long performance load cell. and Double Ended shear beam load cell is widely known for its smooth operations.
Super Position
inductance
what are the effects of load shedding
When a generator is connected to a load it is never going to be perfectly matched because of its inductance, when you have inductance the current starts to lag.
If, for example, the reactive power of a load is due to its inductance, then installing a capacitor in parallel with the load will reduce the overall reactive power.
since both coils will have resistance, yes; but the load will be the primary amp draw
There is no such term as 'inductance reactance'; the correct term is 'inductive reactance'. This is the opposition to the flow of a.c. current, due to the inductance of the load, and the frequency of the supply, and is measured in ohms.Inductive reactance is directly proportional to both the supply frequency and the load's inductance.
inductive load does not allow the current to become zero eve though the supply source get removed . inductive load reduce the power factor . they does not allow sudden change in current in the load ...
Load-shedding can lead to increased stress, anxiety, and frustration due to disruption of daily routines and uncertainty about access to basic amenities like electricity. It can also affect mood and sleep patterns, leading to feelings of helplessness and dissatisfaction. Additionally, prolonged exposure to load-shedding may contribute to a sense of powerlessness and decreased productivity.
A: Relays are nothing but an inductance load to electronics circuit but they do provide isolation to the outside world
Stress testing means increasing the load ,and cheking the performance at each level. Load testing means at a time giving more load by the expectation and checking the performance at that leval. Volume testing means first we have to apply initial load,then at certain time increase the load and check the performance.
How processes load and the number of running processes affect system performance.
how does process load and the number of running process affect system performance.