0
What else can I help you with?
What is the main use of frequency modulation?
Frequency modulation is used to broadcast radio waves to receivers. The most common use of it is in FM radio, which contains a range of radio frequencies.
What exactly are freesat receivers?
"Freesat receivers are used for technical purposes.
What is frequency synthesizer?
A frequency synthesizer is an electronic system for generating any of a range of frequencies from a single fixed timebase or oscillator. They are found in many modern devices, including radio receivers, mobile telephones, radiotelephones, walkie-talkies, CB radios, satellite receivers, GPS systems, etc. A frequency synthesizer can combinefrequency multiplication, frequency division, and frequency mixing (the frequency mixing process generates sum and difference frequencies) operations to produce the desired output signal.
What are the applications of hartley oscillator?
hartley oscillators are mainly used in radio receivers. Also note that due to its wide range of frequencies it is the most popular oscilator
What is difference between quad lnb and quattro lnb?
Quad LNB is used for 4x receivers or 2x twin tuner receivers where a quattro LNB is used with a switcher and can distribute to as many receivers as needed (usually a communual, commercial or large domestic installation. The 2 LNB's use signals differently, so for most domestic installations a quad would be used.
What is the frequency range used on all audio receivers?
The frequency range used on all modern audio receivers is 10.7 to 12.75 GHz. The IF range is 950 to 2150 MHz. Audio receivers are also known as radios.
Which detector is used in tv receivers?
Diode detector
Advantages of TRF receiver?
Advantages of a Tuned Radio Frequency (TRF) receiver include simplicity in design, lower cost compared to superheterodyne receivers, and high selectivity for tuning in to specific radio frequencies. Additionally, TRF receivers can be easily modified and customized for specific applications or requirements.
What types of diodes are used in high frequencies?
Two types used at microwave frequencies are gunn and PIN diodes.
Applications of horn antenna?
1. Measure the box you're trying to wind. 2. Use wire and a variable tuning capacitor. 3. Wind as many turns as you need to to achieve the frequency range you want. 4. Connect the 2 lead to the variable tuning capacitor 5. Couple it to your radio. 6. Use about 1/2 turns for to connect a 300 ohm connection to your radios input. More turns = Lower to mid range frequencies Less turns = Mid to high frequencies.
Why do you multiply or add logarithms when working with frequencies?
I have seen logarithms used with decibels, which are used to measure power or intensity; not with frequencies.
Which cable type is used by a catv connection?
WiMAX - uses a low wavelength transmission, usually between 2 GHz to 11 GHz. These frequencies are not as easily disrupted by physical obstructions because they can better bend around obstacles than higher frequencies.
