i dont know thats why im asking the internet
i dont know thats why im asking the internet
You have to install the master cylinder that is compatible with your truck otherwise if will not work. There is really no difference in a 2wd & 4wd when it comes to the master cylinder.
Engine- 6 or 8brake, one master cylinder, two wheel cylindersclutch, one master and one slave cylinder.Engine- 6 or 8brake, one master cylinder, two wheel cylindersclutch, one master and one slave cylinder.
Which item is not a component of the breaking system? Master cylinder, break hose, orifice tube, wheel cylinder
If a pressure type brake fluid dispenser is available attach it to the top of the master cylinder. Other wise fill the master cylinder, start with the wheel cylinder that is furthermost from the master, and bleed until fluid comes out clean and free from bubbles. make sure to replenish the the master cylinder as needed. then proceed to the next farther wheel cylinder and repeat with the rest of the wheel cylinders. top off the master cylinder. Test with the engine off then with the engine running before driving.
-1
Master cylinder empty (no brake fluid) Leak in brake line or wheel cylinder Defective master cylinder
That depends on where it's leaking out; if it's at the master cylinder, you have a bad master cylinder, if it's at the wheel cylinder you have a bad wheel cylinder if it's at a caliper... well, you get the idea. If you know how to repair a master cylinder, wheel cylinder or caliper, you can often get by with a little savings but it's usually best to just trot down to your local auto parts retailer and get a new or rebuilt one.
Master cylinder possible but could also be wheel cylinder problems or warped rotors
Check the wheel cylinders - they may be leaking and you can't see it on the outside of the wheel
This is a far reaching question that needs more clarification. There are cylinders where the pistons are located. If you have a clutch then you have a clutch master and slave cylinder. On the brakes you have a master cylinder and wheel cylinders. And the beat goes on. You need to distinguish as to which cylinder you are referring.
The master cylinder is typically on the driver's side of the VW. Usually, if you crank the wheel really far to the right, you can see and even reach the master cylinder without jacking up the car.