answersLogoWhite

0

'Red' oil light. It either means your lucky and a top up is required or if it comes on at the same time as a clatter or a bang your engine is goosed?

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

Why are the instrument panel lights off when the rest of the lights are working?

your instrument panel lights can be dimmed(thumb wheel switch) down to practically no lights at all on your instrument cluster, this switch should be located most likely on the dash, left hand side of steering column. If this does not fix the problem ,then you have to check your fuse panel to see if you have a burnt out fuse.


Why no instrument panel lights on 2005 grand marquis?

Most likely cause would be a blown fuse.


How do you replace the instrument panel lights on a 1999 Toyota corolla?

I doubt that all the lights went out at once so lets start with the light switch. Either the switch or something on the light switch panel turns or slides to control the brightness of you instrument lights. It can also shut them completely off. So try that first. Next xheck the fuse panel for the fuse marked inst panel. It is most certainly one of those two things. If not you can always have the light switch or the instrument panel tested. Good luck.


How come your fuse for your instrument lights keeps blowing in your crx?

There can be several things that can cause your instrument panel light fuse to blow. The most common reason is crossed wires that have corroded together.


95 Chrysler grand voyager why do all interior lights come on when dimming or illuminating dashboard instrument cluster?

Most vehicles have the instrument panel light brightness level and the interior courtesy lights [on or off] controlled by the same switch, which usually is a "rotary" type. The on/off function of the instrument panel lights is usually "tied" in with the parking and headlight off/on push-pull switch. The reason for having this additional,manual method of control for the interior courtesy lights is to allow use of the courtesy lights WITHOUT having to open one of the doors. When the parking or headlights are on, clockwise rotation of the headlight switch knob, increases the brightness of the instrument panel lights. Just before full clockwise rotation of the knob, there is a "detent," which if passed, turns on the interior courtesy lights. Full COUNTERclockwise rotation of the knob dims the instrument panel lights to the point of extinguishment, but to my knowledge, full counterclockwise rotation DOES NOT turn on the interior courtesy lights. j3h.


What would cause the dash broad lights to come on and off but only the dash broad lights?

Answer 1 - Instrument Lights Operate IntermittentlyWithout doing a "hands on troubleshooting" of your vehicle, no one here can be certain of the specific location and cause of your problem. However, based on your question, I suspect that the cause is a loose connection in the circuit providing power to the instrument lights, or on the instrument panel circuit board itself.It is possible also, that the instrument panel dimmer switch is wearing out.Answer 2 -The dash dimmer switch or the headlight switch is the most likely problem.


Where is the instrument panel on a Ford Explorer?

Above the steering wheel. Most people can identify the instrument panel by the speedometer in the middle.


You have no tail lights or lights on your instrument panel on a 1995 Chevy Lumina but have headlights and blinkers?

Man vehicles have the dash lights and tail lights wired through the same fuse. Check your fuse box for the dash or tail light fuse. Something has most likely caused it to blow.


How do you remove the instrument panel to change a burned out light bulb on a 1990 Toyota Corolla wagon?

First your remove the fancy plastic molding of the dash. it's usually held on by just a few screws. After this it is easy to access the instrument panel, which again is held in by a few more screws. You might have to work the parts a little to get them to come out and go back in. The dash light, or instrument light, is located on the back of the instrument panel. Most dash lights are a simple twist in variety.


Why should a Toyota 1996 t100 dash light go out all at once when you still have the tail lights working and the fuse is still good and all the dash bulbs are good?

"Dash" [Instrument Panel] Lights "Out"There are several possible causes for this condition, but...Without doing a "hands on troubleshooting" of your vehicle no one can tell you the specific cause. The first and simplest cause is that the switchthat controls the Instrument Panel lights ON/OFF and brightness function has accidentally been turned off.Most vehicles have a switch to control the Instrument Panel lights. The location, type, and method of operation of that switch varies between makes, models, and year of manufacture of the vehicle.On some vehicles that switch is incorporated IN the headlight switch and is operated by rotating the knob of the headlight switch.Usually, full counterclockwise rotation of the headlight switch knob turns the Instrument Panel lights OFF. There is usually a "detent," [click/stop] at the off position.Rotating the knob to the right turns ON the lights at a very low brightness level, and continuing to rotate clockwise causes the lights to increase in brightness until at full clockwise rotation the lights will be at full brightness.On other vehicles, the Instrument Panel lights are controlled by a small "wheel" type of switch that has only a small part sticking out of a slot in the dash next to, or near, the headlight switch. This switch/brightness control is operated by rotating the small wheel. At one end of rotation will be the OFF position, and at the other end of the wheel rotation will be the full bright position.This tricky little switch is the most common cause when all Instument Panel lights are not ON. IF the setting of this switch is not the cause, and you are certain that the fuse [or fuses] for the Instrument Panel lights are "good," and the bulbs are good, then the next most likely causes include:A wiring connector or plug between the switch and the Instrument Panel Circuit Board has become disconnected,A wire has become broken or cut,An "etch" conductor on the Instrument Panel Circuit Board has become broken.The switch itself has become defective.Before tearing into the Instrument Panel to check out these latter possible causes, BE SURE that you have found and confirmed that the ON/OFF/brightness switch is ON and set to full brightness. This solution is a whole lot easier than any of the others.


My 2006 Ford Territory dashboard lights are flicking off and on especially when I turn the blinkers on. Does anyone know what causes this?

There could be many causes for the flickering instrument panel lights, but the most probable cause is a loose connection in the circuit providing the power to the lights, or a loose or poor ground connection.


What is the most important instrument in rock music?

To me the most important instrument in rock music is the electric guitar.