There are a number of different types of lathe. We usually separate them out by whether they are for wood or metal (and other stuff like plastic). The things is, they all do essentially the same thing: they turn a workpiece between two centers and allow the user to apply a tool to remove material from the rotating mass of "stuff" being worked, or, as is said by those involved, turned. The earliest lathes did thi - turned the work so a tool could be used on that material. And we do it pretty much the same way today. The metal lathe most often has a chuck on the headstock (the driven end) in which work can be clamped, and this affords an "open end" on the material so it doesn't have to be supported at the "tail end" of the lathe to work the material. (You aren't turning between centers.) A number of metal lathes are computer controlled (the so-called computer numeric controlled or CNC machines), and they can do a lot of things very quickly and with a high degree of accuracy. And all if it is repeatable. Need some pistons made for your engine? We can do that. Many wood lathes have a faceplate attachment that a wood turner can affix a chunk of wood to so he can turn, say, a bowl. That way the wood can be supported on just the one end and the bowl can be hollowed out. There are lots of wood turners out there, and they make some fabulous stuff. We often say, "I'm turning (something) on a lathe." It could be a wooden bowl to mix pie dough in or a rolling pin for rolling out that pie dough. Certainly it could be any one of a zillion machined parts for aircraft or automotive applications, or just about anything else. There are a lot of things we use every day that have been turned on a lathe, though many of them may not be where we can see them, like a number of engine parts in a car. The largest part of the lathe (almost always) is the bed of the machine. It is the "frame" onto which the headstock and the tailstock are fastened. The headstock has in it the rotating (driven) spindle on which a chuck or faceplate can be fastened. On the bed, the top of it is generally machined to create the ways on which the tool rest or (in the case of a metal lathe) the carriage(with its cross slide and tool post) can sit and move precisely along the length of the bed. There are some other parts and a host of attachments to the lathe. Pictures may very well help you see things. Links are provided to the Wikipedia articles on the lathes, and a link is provided to some "lathe" video clips put up on YouTube. There are a lot(!) of short posts there on lathe work. Check a few out.
A lathe machine is used for machining most of the cylindrical jobs llike shafts, axle ,
round pins and bush. The operations that can be carried out in a lathe machine are simple turning , taper turning, facing and thread cutting.
A lathe is a machine tool that uses a variety of cutting tools including drill bits and tool bits to remove material from a rotating piece of work most commonly using a linear movement. The CNC (Computer Numerical Controlled) Lathe works in the same way but can be programmed to perform a variety of automated operations without the need for an operator to manually control it. This increases efficiency and improves the accuracy of jobs, especially when they need to be repeated.
The objective of lathe machine is to remove extra material from the work-piece to make a desired shape with the help of specified tools.
for making precise jobs, in tool room we make or need a highly accuracy jobs as per order thats why we have to use cnc lathe or convetional lathe..
In lath machine mostly operation we can perfom.
To rest your tool on it.
[object Object]
tool post is used to handle the tool on the lathe machine
carriage is a part of lathe which means to be support cutting tool to give feed to cutting tool and control cutting action.
The centre lathe has only one coaxial tool, whereas the capstan has a rotating multi tool station with indexer and clutch.
Vertical milling machine is for cutting large pieces. The lathe cutting tool motion is perpendicular to the ground. They are said to Karosl lathe.
Yes, It can be achieved by using a knifing tool.
This is the place to close on the lathe cutting tool.
it is a tool used on a lathe to cut metal from right to left
Grinding lathe tools has a biomechincal function that involves the finger tips of a given hand. You need to rub the tool against a scrubber and rinse it out under hot water.
tool post is used to handle the tool on the lathe machine
A lathe is an in the first instance an engineering machine used for turning metals into specific shapes and diameters, adding threads for screw, creating threads for bolts, boring . Woodlates (their predecessor) turning bowls , cutting threats on wood, convex and concave shapes
tool post is used to handle the tool on the lathe machine
rest your tool on
carriage is a part of lathe which means to be support cutting tool to give feed to cutting tool and control cutting action.
function spindles in the lathe There is a long time to find a center cutting machine parts and maintenance.
The centre lathe has only one coaxial tool, whereas the capstan has a rotating multi tool station with indexer and clutch.
Vertical milling machine is for cutting large pieces. The lathe cutting tool motion is perpendicular to the ground. They are said to Karosl lathe.
The lathe machine is an ancient tool, dating back to approximately 1300 BC. It was first developed as a two-person lathe by the Ancient Egyptians.