be able to swim
A Moisture Tester is something that you will know when plants need water
the most important two things we need are water and sun, we need water to live
Wet Mount Slide Steps1. Place a sample on the slide.2.Using a pipette, place a drop of water on the specimen. Then place on edge of the cover slip over the sample and carefully lower the cover slip into place using a toothpick or equivalent.*This method will help prevent air bubbles from being trapped under the cover slip. Your objective is to have sufficient water to fill the space between cover slip and slide. If there is too much water, the cover slip will slide around. Take a piece of paper towel and hold it close to one edge of the cover slip. This will draw out some water. If too dry, add a drop of water beside the cover slip. Practice this until you get used to it.Staining StepsPrepare a wet mount slide.Collect a drop of stain with an eye dropper or pipette.Put a drop of stain on an outer edge of your cover slide.Place a piece of napkin or paper towel against the opposite side of your cover slip, right up against the edge. This will help draw the stain under the cover and across the specimen.You may need to add another drop to ensure complete coverage.The slide is now ready for viewing.Source: Microscope.com
you need one cup of water to germinate a seed
Light microscopes commonly need oil for two reasons. The first is that a dab of oil will keep a specimen still on the slide holding it in place and allowing for easier manipulation. The second is that at high magnification, the large change in refractive index from the glass lens, to air, to the slide limits the resolution of the image. With oil between the lens and the sample, higher resolution is achieved.
A Moisture Tester is something that you will know when plants need water
you need to be able to be sneaky, have high awareness of danger
not coming to the internet to ask it but I t requires a lot of knowledge about what you are doing
You need a little friction when you are going down a water slide and much more
you would need a tool which is called a pressure tester, if you see a leak from the water pump during the test then your water pump is bad and need to be replaced a.s.a.p
no
You need the bottom of the the slide, the you put a specimen on it. After put a drop of water on it then put the cover and apply pressure.
you need to be heartless.
Need to know what you are testing to answer that one.
information and communication technology
i have a double drop raceway slide from banzai i need the hose that connects to the garden hose to keep the slide wet THIS IS NOT THE NUMBER FOR TOYQUEST!!.. This is the number for a hotel. That is why it is crossed out. Please do not call. Thanks.
Due to your age, you normally need to be at least 16 or 18 to be a video games tester and you normally need to have qualifications and at your age you cannot get them, but be careful when you do finally become a video games tester when you are older, some can be scams...