A repeater is an electronic device that receives a signal and retransmits it at a higher level and/or higher power, or onto the other side of an obstruction, so that the signal can cover longer distances.
Signal repeaters are generally used in the telecommunication and electronics industries. There can be passive radio signal repeaters, multi-port repeaters, optical signal repeaters for optical fiber and digipeaters which repeat packet data.
Bridges send information (data) to the specified destination, whereas hubs and repeaters do not.
Hubs and repeaters operate at the Physical Layer of the OSI Model. The Physical Layer is the first layer of the OSI Model.
Fiber-optic communication refers to the transmission of information using optical fiber. Opto-electronic repeaters are used to convert fiber optic light transmissions to electrical signals.
If an organization is planning to change a new system explain the New trends in information and communication technology?
A repeater connects two segments of your network cable. It retimes and regenerates the signals to proper amplitudes and sends them to the other segments. When talking about, Ethernet topology, you are probably talking about using a hub as a repeater. Repeaters require a small amount of time to regenerate the signal. This can cause a propagation delay which can affect network communication when there are several repeaters in a row. Many network architectures limit the number of repeaters that can be used in a row. Repeaters work only at the physical layer of the OSI network model. If you more information you can visit website :http://www.iyogibusiness.com
Signal repeaters are generally used in the telecommunication and electronics industries. There can be passive radio signal repeaters, multi-port repeaters, optical signal repeaters for optical fiber and digipeaters which repeat packet data.
Star Topology, where Hubs can act as repeaters.
it becomes communication system through networking......
communication system
When any digital signal is transmitted over a pair of wires, it degrades in amplitude. Regenerative repeaters receives the incoming signal, extracts the clock, then regenerates the original signal as a clean digital square wave as if it was the original signal transmitted from the source. Thus the name repeater.
Wireless networks often use repeaters to extend the network signal to distant locations. Ethernet repeaters are commonplace as well, as there are limits to the lengths that cables will function at.
repeaters
Bridges send information (data) to the specified destination, whereas hubs and repeaters do not.
TBN repeaters in the Tampa Bay DMA was created in -199#.
Bridges send information (data) to the specified destination, whereas hubs and repeaters do not.
There are many main uses for UHF repeaters. Examples of the main uses for UHF repeaters include transmitting different audio paths and receiving different audio paths.