A mains lead is the power cable for the strip heater. The mains lead is single-insulated.
The holes on the back are there for quick wiring. You strip the wire and then insert it into the holes. It is held in place by spring tension. I do not recommend you wire the outlet by using these holes. From my experience the wires are not secure enough. Strip the wire and wrap it around the screws and tighten it securely which is what all the good electricians I know do. Takes a little longer but IMO it is more secure.
The ballast for strip lighting is in the wire raceway. Strip lighting is bolted together in sections. Every section has a ballast for ever set of lamps that hang below the wire way. When wired, these ballasts are all parallel connected together and when sourced with voltage they will all come on at once. The whole strip of lighting will illuminate.
1- low lube oil safety 2-water safety 3-temprechar safety any athar safety
Devices used to open an electrical circuit are called OCPD's. (overcurrent protection devices) The most common are circuit breakers and fuses. In commercial motor starters they often employ another OCPD called a "heater" (UK thermal fuse) which is a metal strip which melts like the element in a small fuse when too much current (amps) go through it. They devices are in the circuit primarily to protect the wiring and devices they power. Circuit breakers such as in your home panel do protect you from a "shorted" circuit. Another safety and most common in residences are GFCI's or ground fault circuit interrupters (UK ELCB, Earth Leakage Circuit Breaker or RCD, Residual Current Detector) which come as both a receptacle (female plug) or as a circuit breaker.
It is an electric heater, with the heating elements in a straight line (a strip)
A mains lead is the power cable for the strip heater. The mains lead is single-insulated.
bending acrylic
The most obvious health and safety issue connected with strip heating is the possibility of fire.
1:Tie back long hair and secure loose clothing 2:Wear an apron 3:Wear safety glasses 4:Don't leave it on unattended 5:Wear leather gloves
how to use a strip heater is simplez dont burn yourself and keep your hands away from the hot metal bar so its simplez compare the meerkats.com
Restaurant and bar supply retailers would be a possible place that you could purchase a hot strip heater. Web restaurant store has their own website which would be your best bet for purchasing a hot strip heater.
A strip heater
Say you have water travelling through tubes, and you wish to heat that water as it goes... Attaching a strip heater around that tube would enable you to regulate the temperature of the water passing through.
A Hot Wire Strip Heater
does the bypass valve on elution heater be open or closed
over 100 degrees c so don't touch it.