The stock Jeep Wrangler Rubicon audio system is an Alpine Premium Audio System. Further specifications can be provided by the car manufacturer upon inquiry.
There is plugs on the end of the speaker wires. "The wires coming from the subwoofer box. There should be to wires coming from the sub enclosure". These wires should have a plastic plug on the end that plugs in to the amplifier.
You need to specify if this is a stock or aftermarket subwoofer. You need to specify if this is a stock or aftermarket subwoofer.
measure the diameter of the hole for the speaker/subwoofer and the distance to each bolt hole to asure you get the right subwoofer to fit properly.
There Is none.
if it is a stock sub woofer it should be an 8 inch
remove the plastic trip pieces around the subwoofer including the strip at the back of the vehicle and the pillar trim with the tweeter and unscrew it from the stock box
True, there is no stock subwoofer in that truck.. for good sub ideas, go to mtx.com and check out their thunderform enclosures. They are vehicle specific That truck doesn't have a stock sub.... == == umm i did the same thing as you only i got a bazooka nos 8 subwoofer tube and fact of the matter it dosent fit behind the seat in a regular cab i took out my console and mounted it in between my seats it is the nos inspired one it looks awesome.
it is located in the trunk underneath the carpet
In the trunk, right hand side behind carpeting. The radio controller is in the dash. The actual tuner and amplifier are in the trunk.
268 deg
57 mph according to the factory specs
In the trunk behind the plastic baffle. Just pull that back (held on by magnets) and you'll see the navigation control box and the stock amplifier.