105 ft
144 in-lbs
Pull the inspection plate off, reach in with an end wrench and tighten them up. Use a screwdriver on the flywheel teeth to turn it so you can get to all of them. If the holes have become elongated, you will need to replace the flex plate.(Flywheel)
Inside the engine. It is the part that spins and has the pistons attached to it. The flywheel bolts to it on one and and the front pulley drives the belt.
The tie rod torque bolt settings, on your 2000 Jeep grand Cherokee, is 70 pounds per square inch. The bolts should be torqued in 35 pound intervals.
The flywheel, also called a flexplate, is in between the engine and transmission.
18 ft lbs, 24 NM
No.
2
It is inside the torque converter.
It is 175 ft lbs for the front wheel bearing of a grand cherokee
On the torque converter. Do a Google search and read about torque converters.
No. The torque converter does not have a drain.