* Step 1: Bolts 1 - 8 to 61 N·m (45 ft. lbs.) * Step 2: Bolts 1 - 8 to 88 N·m (65 ft. lbs.) * Step 3: Bolts 1 - 8 (again) to 88 N·m (65 ft. lbs.) * Step 4: Bolts 1 - 8 turn an additional 1/4 Turn. (Do not use a torque wrench for this step.)
175 ft lbs they may not look like they can handle that much torque but you dont want to under torque them.
40 ft.lb.
If front axle of front-wheel drive, it's about 200 ft.-lbs. If back, not all-wheel drive, see question on rear axle of 92 voyager.
www.autozone.com look for specs and or parts location
Go to this URL; http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/1a/3c/0e/0900823d801a3c0e.jsp
4 steps, 25 ft lbs, 50 ft lbs, 50 ft lbs, 1/4 turn.
need torque specs for 3.4 pontiac grand am intake and rocker arms
195 lb·ft of torque (205lb·ft of torque for GT)
Cylinder head gasket torque specs on 2003 Pontiac Grand Prix 3.1 L V-6
Torque specs for a 1996 Pontiac Grand Prix 3.1 is 185lb-ft of torque at 4,000 RPM.
Go to library and get a chiltons manual for your car.
NHTSA front-impact crash-test rating is 4 out of 5. The Plymouth Voyager has three doors and comes with a 4 cylinder engine or a V-6. The engine is in the front and they have front-wheel drive.