0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the function of the collar of a Bunsen burner?
The collar regulates the amount of air which mixes with the fuel gas before it is burned. If the hole in the collar is not lined up with the hole in the bunsen stem, the fuel does most of its mixing with air at the top of the burner. This makes burning inefficient and the flame is cool. When the two holes line up, air is pre-mixed with the fuel, burning is much more efficient and the flame is as hot as possible.the collar of a bunsen burner is the part which doesnt get hot and you can twist it to close or open the air hole.Turning the collar opens and closes the air-hole which allows a controlled amount of oxygen to mix with the gas. The amount of air mixed in determines the colour and heat of the flame.The collar controls the amount of air and thus oxygen that can reach the methane gas inside the burner. With the hole closed there is no additional oxygen to mix with the methane and so we have a yellow flame. Opening the hole allows oxygen to mix with the methane so it burns at a higher temperature and with a blue flame.The collar on the Bunsen burner is to allocate as much oxygen as desired from the atmosphere into the Bunsen burner. The more oxygen in the Bunsen burner, the bluer or clearer the flame is. It is much hotter when in the blue flame.
Is the blue or yellow flame noisier on a Bunsen burner?
The Blue Flame Will Be Noisier. The Yellow Flame Is Called A Safety Flame Because Everyone can See it. There Are Two Blue Flames: Medium Roaring The Roaring Flame Has A Blue Cone In The Middle Of The Flame And It Is The Hottest. It Also Has More Oxygen. But Overall, The Blue Flames Will Be Noisier Than The Yellow Flame.
What are two light energy waves that you can't see?
The two ligh energy waves that you can't see are ultra-violet (UV), and infra-red (IR). Ultra-violet light waves are measured at 380nm and below, infra-red light waves are 750nm and above. Normal light that you can see resides between these two regions.
Name the two types of energy?
Name two types of energy
What are two sources of thermal energy?
The two types of thermal energy sources are Geothermal and Thermal Energy
What are the two regions in a Bunsen burner?
What are the two regions in a Bunsen burner? The two regions in a Bunsen burner flame are: 1.An outer transparent, dim blue cone. 2.An inner,less transparent, brighter greenish-blue cone. This relatively non luminous,cone shaped flame is a combustion of carbon-hydrogen fuel which is used in a Bunsen burner to provide heat for laboratory purposes.
How many holes are in a Bunsen burner?
only two holes
What two elements Bunsen burner discovered?
Caesium and Rubillion
What two substances are reacting when a Bunsen Burner is ignited?
The substances of methane (CH4), also known as natural gas, and air (O2) mix to start a Bunsen Burner.
What are the two kinds of flames produced by Bunsen burner?
The two types of flames a Bunsen burner can produce are a luminous, yellow flame and a "roaring" blue flame. The blue flame is much hotter than the yellow flame.
What did Mr Bunsen invent?
Robert Bunsen did NOT invent the Bunsen burner. It was his assistant Peter Desaga, who developed it. He discovered two new elements, the metals caesium and rubidium.
What kind of flame are produced by the Bunsen burner?
The two types of flames a Bunsen burner can produce are a luminous, yellow flame and a "roaring" blue flame. The blue flame is much hotter than the yellow flame.
Name two compounds which can be decomposed by heating them in a Bunsen burner?
Two examples are: sodium carbonate and calcium hydroxide.
How do the Bunsen burner looks like?
I prefer a number-two pencil and sheet of fine copier paper when drawing pictures of laboratory equipment. But the technique is pretty simple: you either get a Bunsen burner from the lab, or download a photo of one from the Internet, and sketch it.
What are the two colors of a Bunsen burner flame?
The two colours are yellow - when the air-hole is open, and blue - when the air-hole is closed.
Parts of a Bunsen burner adjusted?
There are two adjustable parts on the Bunsen burner, the knob to control gas flow and the rotation of the collar to control air flow. The gas flow control, adjusts the size of the flame by controlling how much gas is burned. While the collar controls the intensity of the flame by controlling how completely the gas burns, more complete combustion the hotter the flame. These are the two parts to adjust a Bunsen burner, I hope I have answered your question.
What is Bunsen Burner used for?
A Bunsen burner produces heat and creates a heat source when doing an experiment. It uses methane and there is two flames a safety flame-you can put your hand through it without burning your hand and a roaring flame-this flame is blue and it is what you use when you preform an experiment.
