The following are all common digital electronic logic gate types:
AND
OR
NAND
NOR
XOR
NOT
There 'truth tables' and therefore their corresponding functions can be found on wikipedia under articles entitled with their respective names.
NAND is a very common gate in commercial digital electronics as all other gates can be imitated by connected the correct number of NAND gates in the correct way. These can then be placed on one IC (Integrated Circuit) chip which reduces cost massively.
Series and parallel.
They are the two main types of basic circuit.
In a series circuit the current stays constant and the voltage is divided amongst the various loads.
In a parallel circuit the voltage stays constant - every branch of the circuit gets the same voltage from the power source - but there is a different current in every branch. No current gets lost.
The total current entering any junction (branch point) must be equal to the total current coming out of the junction.
AnswerThere are four categories of circuit: series, parallel, series-parallel, and complex. 'Complex circuits' are not necessarily complicated (although they very often are); the term simply describes any circuit (e.g. bridge circuits) that doesn't fall into any of the first three categories and which need to be solved using network theorems.
AND and OR gates are two main categories of logic gates , we can make any circuit using these two gates.
sensory and cognitive
A: An example will be a power supply for a static circuit it just perform its duty nothing more. Dynamic circuitry involves circuitry that continuously change as data in inputted like a computer for instance
universal logic gate is a gate using which you can make all the logic gates there are two such gates NOR gate and NAND gate
Integrated circuits are produced with a myriad of functions today. Although early ICs tended to be digital logic circuits, there have been both analog and digital types throughout their history. Many ICs now combine digital and analog circuitry within a single package. So, an IC can be digital, analog or a hybrid of the two.
It was mentioned that there are two different ways to connect two or more electrical devices together in a circuit. They can be connected by means of series connections or by means of parallel connections. When all the devices in a circuit are connected by series connections, then the circuit is referred to as a series circuit. When all the devices in a circuit are connected by parallel connections, then the circuit is referred to as a parallel circuit. A third type of circuit involves the dual use of series and parallel connections in a circuit; such circuits are referred to as compound circuits or combination circuits. The circuit depicted at the right is an example of the use of both series and parallel connections within the same circuit. In this case, light bulbs A and B are connected by parallel connections and light bulbs C and D are connected by series connections. This is an example of a combination circuitBy EngineerMuhammad Zaheer Meer GMS
The two basic categories of transmission are:High voltage transmission andLow voltage transmission.
AND logic gate is used to obtain the product of two digits. It is used in various combinational and sequential circuits.
both combinational and sequential circuits have two inputs and outputs..!
The two basic types of circuits are series and parallel circuits.
Tubes, magnetic logic, and transistors.
You haven't stated any categories.
You tell me!
The two main types are series and parallel circuits. From these two circuits comes combinations of different series parallel circuits depending on what end results you need.
I believe the answer is DICTIONARY DRIVEN encoders and LOGIC BASED encoders.
The two main categories are convenience goods and shopping goods; two lesser categories are specialty items and unsought goods.
Resistors can, in fact, be connected in four different ways. These configurations are termed:seriesparallelseries-parallelcomplex
Deoxyribose and Ribose
botany and zoology.