Want this question answered?
A: A zener is a diode that when connected in the reverse mode current direction it will breakdown to a predetermined voltage any further increasing voltage the breakdown will remain practically the same.
the main function of the diode is to allow current to flow in just one direction and oppose the flow of current in negative direction.In short diode rectifies the current..
the main function of the diode is to allow current to flow in just one direction and oppose the flow of current in negative direction.In short diode rectifies the current..
It conducts in only one direction.
The production of ATP from the breakdown of glucose.
There are two main factors that cause a mutation in DNA. These factors include: the DNA fails to accurately copy itself and external influence cause a breakdown in the DNA.
mechanism of main cells in a kidney?
kidneys
The mechanism and main driver of adaptive change in evolution is natural selection.
The production of ATP from the breakdown of glucose.
The four main parts of a car's alternator are the regulator, rotor, stator, and diode bridge.
A zener diode is like a regular diode when connected in forward bias which means it will control the flow of the electricity throughout the circuit. Usually you'd find a zener diode in a reverse bias mode because of its purpose which is it has a breakdown voltage value of 5.6v; this shows that the circuit output voltage will be regulated at the same value of 5.6v. It also has the ability to change its own internal resistance based current flow passing through it helping sustain a fixed voltage of 5.6v. The benefits of a zener diode are that it is a less cost effective voltage regulator, its simplicity is based on the fact it's a diode with two overall purposes. The main purpose of a zener diode is to maintain a fixed voltage; in order for this to happen it must lower or raise its resistance depending on the actual current flowing throughout the circuit. If the current increases the zener diode will raise the resistance in order to maintain the fixed voltage. If the resistance lowers the diode will raise it because the fixed voltage should be at 5.6v, and works in reversed biased.