The Auxiliary Carry flag of the Intel 8085 is used to store the carry/borrow from the least significant 4 bits of an 8 bit arithmetic operation. This bit (and the Carry flag from the most significant 4 bits) is needed by the Decimal Adjust Accumulator instruction to convert the result of the 8 bit arithmetic operation to correct 2 digit Binary Coded Decimal format.
there are 5 flags of intel 8085 are: Carry flag(CY), parity flag(P), Auxiliary Carry flag(AC), Zero Flag(Z), Sign flag(S).
We have only one flag register of 8 bits. Bits description is as follows (Assuming D0=LSB & D7=MSB) D7=Sign Bit. D6= Zero Flag D4= Auxiliary Carry Flag D2 = Parity Flag D0= Carry Flag.
The Auxiliary Carry (AC) flag in the 8085 indicates a carry out of the low order 4 bits of an operation, more specifically that the low order 4 bits are greater than 9 (10012). The AC flag can thus be used to facilitate decimal arithmetic.
The 8085 microprocessor has 5 flags: 1. Zero flag: The zero flag is set, when the ALU operation results a zero . 2. Carry flag: If an arithmetic operations results in a carry, this flag is set. 3. Parity flag: This flag is set, when an arithmetic or logical operation results in a data, which has even number of 1s. If otherwise, it is reset. 4. Sign flag: After the execution of an arithmetic or logic operations, if D7 bit of the accumulator is 1, it indicates a negative number and this flag is set. If otherwise, it is reset. 5. Auxiliary Carry flag: used for BCD Operations, During the BCD operations, if D3 bit producing the carry then the AC bit set as1, otherwise the bit is 0. 6. Carry Flag: when a carry is generated by digit D7, then the carry flag set as 1, otherwise the bit will be 0.
Flag Register (PSW)Status is indicated with individual bits: 0 - CF - Carry Flag2 - PF - Parity Flag4 - AF - Auxiliary carry Flag6 - ZF - Zero Flag7 - SF - Sign Flag8 - TF - Trap Flag9 - IF - Interrupt Flag10 - DF - Direcetion Flag11 - OF - Overflow Flag
if the result of an arithmetic operation, consists a carry then the carry flag is set
The carry flag indicates a carry or borrow resulting from an operation. You can use it to build multi-precision representations. The auxillary carry is very much the same, except it indicates a decimal carry or borrow, useful when representing BCD digits, and can then be used in the various "adjust for addition", etc. type of instructions. (DAA, AAA, etc.)
The future tense uses the auxiliary verb will.
Present perfect tense:Subject + Auxiliary Verb "have" + Past ParticipleI have entered.
INR affect the carry flag.
30 gallons
Flags are microprocessor dependent. ie flags are different for different microprocessors. Flag represents the status ( & Type) of the operation performed. Ex: In terms of 8085 we have 5 flags : Zero, Carry, Ac Carry, Parity, Sign Flag register is of 8 bits in this case. These flags can also be used for logic implementation.