It was used as an idle code for when no messages were being sent.
PAS Code - Personal Accounting Symbol. An eight character code assigned to each AF unit. Every member assigned to that unit is assigned the same PAS. Every organization consists of one or more unique PAS codes.
A five-letter code identifying a defined mission capability and the personnel/equipment required to carry out the capability.
Plug the unit into the obd port on the vehicle and start the read process, when it finishes it will display the active codes and ask you if you would like to clear them.
The instructions that come with the unit explain how to do it. They vary from unit to unit, so there isn't a "pat" answer. If the instructions aren't available, the best bet is to search online for that remote's codes and instructions. The manufacturer of the remote usually has a support page with the instructions and the codes.
Unit Five Seven was created in 1957.
You need to contact the dealer with your VIN as the codes vary from car to car. or you can get Jaguar radio codes from unit serial numbers online here: http://www.radionavicode.ivgsoft.com/select.php?MK=20
No difference in the engines, just in the ECU (Engine Control Unit) programming. OBD2 doesn't let you have the diagnostic codes without a code reader.
It is Alpine made unit and normally radio comes with security code printed on the code card. Code entry insturctions are provided in the manual. In case you lost the code card, you can obtain the original code from dealers, but you have to proove ownership and provide the VIN of the car etc. If you still can't get the right code for your Alpine C33 unit,
I had same problem i emailed daewoous and they responded: Following are fifteen (15) individual, 4-digit codes: 4316, 2152, 4513, 4362, 1156, 2145, 3451, 6361, 5624, 5241, 3346, 1165, 3241, 4524, 5436 Using the station preset buttons, input each of these individual 4-digit security codes into your audio unit ONE 4-digit code at a time. ONE of these security codes should work for you. IF NONE OF THESE SECURITY CODES WORK FOR YOUR AUDIO UNIT, you will need to do the following: 1.Using a suitable trim removal tool, carefully remove the frame / trimplate that surrounds the audio unit. 2.Remove the audio unit retaining screws. 3.Slide the audio unit forward and look on TOP OF THE UNIT in the lower right hand corner. There, you will see a label with 10 numbers on it. Example: 1234567890 4. E-mail us with this number and we will provide your code. customerse​rvice@daewo​ous.com
Sometimes simply disconnecting the battery will clear codes, or after cycling through the start mode so many times will do it .You can also plug an O.B.D. unit into your E.M.C. as a code reader and clear codes. Pull the fuse for the ecm.
As with all universal remotes, the code for this amplifier will depend upon the remote unit you have. If you have tried programming it with all of the RCA Receiver codes available, you may have to change your remote to a newer model, buy a learning remote, or use a remote like the Logitech Harmony that has a much larger code database.
unit distance code mean b c d codes.b c d code is also called unit distance code.it is weighed