32lb tongue weight, 850lb towing weight
According to AllData, the toe alignment specs are 0.03 degrees +- 0.25 degrees, which essentially means zero degrees (no toe-in or toe-out).
Toe in 1/16 of an inch
The wheel alignment specs should compensate for crown in the road. The settings should be 2.54/2.73 for the caster and +.21/-.04 for the camber. The toe should be 1/16".
The castor settingÊis positive 4.7 degrees. The camber setting is positive 0.25 degrees. The toe in is 0.10 inches.
I Use 1/2 inch of toe in
check front caster/camber and toe , and then possibly adjust to within specs.
The factory specified range is .05 degrees to 0.15 degrees.
Black Men Revealed - 2007 Head to Toe Turn Ons and Turn Offs 1-5 was released on: USA: 11 February 2007
Caster 2 to 4 degrees Camber -1 to 1 degrees Toe 0 to .2 inches
camber both left front and right front --( negative 7) caster left( positive 3) right side ( positive 2.7) toe-- both left and right (zero) rear same specs as the front
I just had an alignment performed on our 2005 Town & Country Limited. Alignment Specs are as follows (per the printed report given me by the dealership): Camber (Front Left & Right): -0.3 to 0.5 Caster (Front Left & Right): 1.3 to 3.3 Toe (Front Left & Right): -0.05 to 0.15 Cross Camber (Front): -0.5 to 0.5 Cross Caster (Front): -1.0 to 1.0 Total Toe (Front): -0.10 to 0.30 Camber (Rear Left & Right): -0.3 to 0.3 Toe (Rear Left & Right): -0.10 to 0.10 Total Toe (Rear): -0.20 to 0.20 Thrust Angle (Rear): -0.30 to 0.30