you dont torque the valves
Torque for butterfly valves cannot be determined using a generic method. You must request the conversion table from the manufacturer.
First of all, They DO NOT TORQUE. If I told you how to adjust the valves you would just get confused. You need to get a chiltons book and follow the directions on how to adjust the valves. If you did torque are adjust / tighten the valves all the way down then you have probley bent a push rod are a valve. Rocker arms that are too loose will clatter, and you won't have all the lift of the cam opening up the valve. Rocker arms that are too tight can bend pushrods, hold the valves open, and bottom out the springs.
By now I'm sure you've found the answer. But a Pontiac engine does not have adjustable valves. You simply torque them down to 20 foot pounds.
From the factory, Pontiac engines do not have adjustable valves. You simple torque them down to 20-25 foot pounds.
in the Auma valves torque switches are used to cut off the motor incase of excessive force due to jamming of valves or at the end positons failure of limit swtches, once the end positon is reached still motor is enrgised conditon due to limit switch problem it causes excessive torque on the worm by sensing its axial movement , it is transmitted by a lever and gear arrangement to a microswitch and it is adjsutable thorugh a spring force.
There are no torque specs on 350 Chevy engines. Set solid lifter cams with cam manufacturers backlash specifications, set hydraulic lifter cams with 0 backlash plus 1/4-3/4 turns preload. To my knowledge you don't torque valves, you adjust them.Each one must be done individually.
ball valves offer numerous advantages over other types of valves, including quick and easy operation, tight sealing, low torque requirements, durability, versatility, and minimal pressure drop. D Chel Valves are the leading Ball Valves Manufacturers in India.
ball valves offer numerous advantages over other types of valves, including quick and easy operation, tight sealing, low torque requirements, durability, versatility, and minimal pressure drop. D Chel Valves are the leading Ball Valves Manufacturers in India.
Based o the torque required for easy opening/closing by human efforts.
install 350 heads with bigger valves works well for more torque at lower speeds
There isn't a torque setting. You adjust the valves by tightening each rocker arm until there is no clatter and then tighten them 1/2 turn more.