First of all, They DO NOT TORQUE. If I told you how to adjust the valves you would just get confused. You need to get a chiltons book and follow the directions on how to adjust the valves.
If you did torque are adjust / tighten the valves all the way down then you have probley bent a push rod are a valve.
Rocker arms that are too loose will clatter, and you won't have all the lift of the cam opening up the valve.
Rocker arms that are too tight can bend pushrods, hold the valves open, and bottom out the springs.
what is the torque on 2.2 rocker arms and in what order
what is torque spec for rocker arms on 2004 4.6 landrover discovery
14lbs
i need to know what the torque specs are on the rocker arms for a 97 Chevy lumina, 3.1L v6
i need rocker arm torque for 3176 cat
22 ft lbs
i'm looking for the torque specs on the rocker arms on a 1999 ford ranger 3.0 v6 the torque is 18-26 lbs
The rocker arm specs for a 3.1 sfi is 18 foot pounds of torque for the rocker arm nut. The nut should be set with a torque wrench as this setting needs to be accurate.
The 99 milllin
The torque specs for a 1995 s-10 rocker arm nut is 22 ft lbs.
need torque specs for 3.4 pontiac grand am intake and rocker arms
11 foot pounds