32 and 64 bit
Intel has released processor with a variety of bus / memory widths. The 386SX had a 16-bit data width, the 386DX and 486 had a 32-bit bus width, and the Pentium had a 64-bit data bus.
there are mainly 3 buses are there in 8085. They are: Address bus :-Used to carry address Data bus :- Used to carry data Control bus :-Used to carry signals such as control and timing signals
In technology, the bus is used to carry data. The width of a data bus helps determine the amount of bytes that can be carried out each second.
it is used to control the carry the data on bus cable
active bus
The Intel 8086 and 8088 motherboards had the system bus speed, which is 5-10 MHz However, the processors for the motherboards had different external data bus widths with the 8088 CPU featuring an 8-bit bus and the 8086 a 16-bit bus.
The data bus is used to read or write (hence bi-directional) to the data location selected by the address written on the address bus. You only need to write (one-way) to the address bus to select the data location. It does not make sense to read from the address bus.
the bus through which the data are transmitted or received within microprocessor and with peripherals is called as data bus.when used internally to microprocessor called internal data bus.
Internal data bus is defined as a collection or a sequence of the signal line that are responsible for carrying data from one computer to another computer or from one destination to another destination. Basically it is used to transfer data to the external drives and also referred as the internal bus.
A data bus is used to transfer data. In Computer Information Systems in school (Dual-Enrolled)
Bus :- Bus is a transmission medium which is used to transfer the data or information from one device to other device. There are three types of bus 1. Address Bus 2. Data Bus 3. Control Bus
There are 2 kinds Data bus and address bus data bus which carries the data ( includes both instruction and data). address bus which carries where the data in the data bus must be sent to in the RAM or which I/O device has to be active to read / write data to the data bus .