Want this question answered?
If I'm not mistaken, there is no machine that can reduce friction. The machine is intended to change the distance the input force is applied over or to multiply the output force. The moving parts of the machine will always increase friction. In order to reduce the extra friction (but not completely remove it), one would use a lubricant or reduce the roughness between two surfaces. Hope it helps.
some use magnets others use lubricants such as oil and grease
Friction in a machine can reduce the mechanical energy produced by increasing the amount of energy lost as heat. Friction between moving parts causes resistance, which converts some of the mechanical energy into thermal energy. Minimizing friction through lubrication and proper maintenance can help increase the efficiency of a machine and maximize the amount of mechanical energy it produces.
Friction is cased by parts of the machine rubbing past one another. When this happens the parts tend to stick to each other which slows down the machine and heats up the parts. Thus the energy used to drive the machine is diverted from the purpose for which the machine was constructed and the machine becomes less efficient. To reduce friction and make the machine more efficient, lubricants (eg oil) are used to make sure that parts that come into contact can slide past one another more easily. -------------------------------------------------------------------------------- Friction causes machines to slow down, and heat up. effecting efficiency negatively first off excess causes a decrease in speed increase in wear on parts. Also friction causes heat which causes metals to expand. For optimal mechanical efficiency, friction is the enemy. ------------------------------------------------------------------------------------ Friction decreases efficiency. This is because when there is friction, heat is created. Therefore some energy is lost in the form of heat.
wear and tear the machine parts
I think it would a lubricant not a part...
Oil and grease can reduce the amount of friction, making it easier for parts to slide against one another, and reducing the amount of heat produced.
energy used for the machine will get lost as heat .machine parts will get worn out.
Machine parts use ball bearings to reduce friction, making it easier to move the moving parts and producing less wear on the parts.
If I'm not mistaken, there is no machine that can reduce friction. The machine is intended to change the distance the input force is applied over or to multiply the output force. The moving parts of the machine will always increase friction. In order to reduce the extra friction (but not completely remove it), one would use a lubricant or reduce the roughness between two surfaces. Hope it helps.
some use magnets others use lubricants such as oil and grease
It's to reduce friction (and thus heat) generated while the machine's parts are moving.
Friction in a machine can reduce the mechanical energy produced by increasing the amount of energy lost as heat. Friction between moving parts causes resistance, which converts some of the mechanical energy into thermal energy. Minimizing friction through lubrication and proper maintenance can help increase the efficiency of a machine and maximize the amount of mechanical energy it produces.
Grease and oil is used in machinery to prevent the moving parts from wearing out too soon due to friction.
Friction is cased by parts of the machine rubbing past one another. When this happens the parts tend to stick to each other which slows down the machine and heats up the parts. Thus the energy used to drive the machine is diverted from the purpose for which the machine was constructed and the machine becomes less efficient. To reduce friction and make the machine more efficient, lubricants (eg oil) are used to make sure that parts that come into contact can slide past one another more easily. -------------------------------------------------------------------------------- Friction causes machines to slow down, and heat up. effecting efficiency negatively first off excess causes a decrease in speed increase in wear on parts. Also friction causes heat which causes metals to expand. For optimal mechanical efficiency, friction is the enemy. ------------------------------------------------------------------------------------ Friction decreases efficiency. This is because when there is friction, heat is created. Therefore some energy is lost in the form of heat.
Friction creates heat. Heat could melt machine parts if it becomes too high. That's why many machines use lubricants while they're drilling or shaping metal.
The excess friction will cause the moving parts to heat up - even to becoming red hot! A cooling system: water, fans and radiator, or lubricating oil, is used to reduce the friction and so lessen the wear and tear on the moving parts.