0
What are typical flue gas temperatures of a category 3 gas furnace?
Wiki User
∙ 6y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the typical flue gas temperature of a category 3 furnace?
120
What is the purpose of the vent on a gas furnace?
The purpose of the vent on the furnace is to ventilate flue gases out side of the house.
What is the cost of having a wood furnace?
A lot will depend on where you have the furnace installed as you must have a chimney to carry the smoke outside. There is the cost of the furnace itself which must be sized properly so that it can heat the entire space. You must have the chimney or flue cleaned every year and other maintenance must be performed regularly - like removing the ashes. You must have enough wood to burn to heat the space you have in mind for the entire winter.
What happens when a gas fireplace flue is closed during use since I accidentally left the flue closed and did not realize it for hours?
You survived the incident. Flues are not air tight, so some of the carbon monoxide went up the chimney. There was probably enough air movement to keep the concentration down, at least for the length of time it was happening. You probably had the furnace on also and that helped. Do it all night, and you might wake up dead in the morning.
What would the flue-gas symptoms be if there were too much airflow?
It would be Non-Existent. All Flue gases would be ventilated and thusly removed.
What is the typical flue gas temperature of a category 3 furnace?
120
Can you run gas furnace and gas hot water heater into one flue?
Of course If the flue is sized properly
What the purpose of the vent on a gas furnace?
The purpose of the vent on the furnace is to ventilate flue gases out side of the house.
What is the purpose of a vent on a gas furnace?
The purpose of the vent on the furnace is to ventilate flue gases out side of the house.
What is the purpose of the vent on a gas furnace?
The purpose of the vent on the furnace is to ventilate flue gases out side of the house.
How can you tell if its a high efficiency furnace?
pvc flue pipe and has a condensate drain
What is the Heat loss in blast furnace?
In a furnace large amount of the heat supplied is wasted in the form of exhaust or flue gases.. that s called as heat loss in a furnace..
What is a furnace draft?
The air flow up your chimney that carries the products of combustion (flue gases) out of your house.
Can a gas fireplace and a furnace share a chimney?
If both fireplace and furnace are BOTH gas, if the flue has the correct size, AND if your building code permits, yes. If furnace and fireplace are different fuels, no. Check with your local building inspection department.
How do you light a pilot for a HVAC?
if it's a 90 % furnace you may have a flue or intake air problem or a bad pressure switch make sure you are venting the flue gases and the fresh air intake is clear
What is the difference between flue gas and stack gas?
There is no difference. They both refer to the product that leaves a furnace post combustion
What do you call a hollow vertical structure of masonry which allows smoke and gasses to escape from a furnace fireplace or stove flue?
the correct answer is a chimney
