A good way to measure ground distance is by pace count.
to measure sound from distance use decibels
Measure they key, typically found near one of the corners. And then measure it and see how many kilometers/miles it is then measure the distance from your starting point to finishing point and compare it to the key
You can measure it by using absolute magnitude.
hands span and feet
Use the scale given in the map. Measure the distance by tracing the road with a string. Then measure the string. eg.10 cm. This is the working to get the distance: scale given = 2 cm distance n cm. = 10 cm = 10/2 = 5 ans=The distance on actual ground is 5 km.
There are two ways to find the distance traveled. One is to measure the distance traveled. The other is to measure the distance raveled within a certain amount of time and then multiply to find how far it will travel in the future.
Nothing.Inches are a measure of distance, not weight.Nothing.Inches are a measure of distance, not weight.Nothing.Inches are a measure of distance, not weight.Nothing.Inches are a measure of distance, not weight.
if you have this car, YOU can measure it; make a small mark on the tire & the ground (try chalk) & have someone inch the car forsard. once the mark on the tire is exactly in the middle (touching the ground) make another mark on the ground. measure the distance & voila
In a standard softball field, the distance from home plate to first base is 60 feet. To physically measure this distance, we use a long, windup tape measure. Note: The distance between any of the bases is 60 feet. From the tip of home plate to the far side or back of the 1st base bag.
computers use the trajectory of the baseballs flight path to determine where the ball would have landed if the seats had not been there and it would have landed on a level ground. They then measure the distance from where the ball would have landed on the ground from home plate
Radio signals are continuously beamed from satellites to GPS ground stations, which record the exact distance between the satellites and the ground station. Over time, these distances change slightly. By recording the time it takes for the GPS ground stations to move a given distance, scientist can measure the speed at which each tectonic plate move