depends on the wood, nails, screws. but both are ok use
Screws have a helix design, that drills into the wood, and also holds materials together.
The most common method is with one or more screws or nails. Wood screws are especially made for the purpose. But screws and nails are not the only option. They can be bolted or pinned together, for example. with a bolt
Nails are driven into wood by force, and the tightness of fitting into the hole holds the material together. Screws twist into the material, and the threads of the screws bite into the wood, giving better holding power.
If you want to use a wood that is very strong so that it holds screws longer, your best bet would be to use a hard wood as opposed to a softer wood. Pine is considered a soft wood. Ash is considered a good quality hardwood.
fastener and even if it is designed to fasten wood to wood, it could also fasten sheet metal to wood.
You can use drywall nails or drywall screws. I prefer the screws.
When looking for high holding power in a wood that will hold screws, the best wood to use is most any type of hardwood. This can include those such as oak, beech, maple, mahogany, and teak.
you could use screws and nails, and depending on the size, wood glue and duct tape
One reason is that when a wood screw is screwed into a piece of wood, the wood fibers expand and cut off the oxygen. Without oxygen there is no oxidation.
you can make one out of chains, wood, and some metal, and screws
Wood, screws and common sense.