They send their routing tables to directly connected neighbors.
Which two technologies can be used in distance vector routing protocols to prevent routing loops?
Which two technologies can be used in distance vector routing protocols to prevent routing loops?
Distance vector protocols compute their routing tables before sending routing updates; link-state protocols do not.
Full question is: What describes a route learned dynamically It is A identified by the prefix C in the routing table B automatically updated and maintained by routing protocols C unaffected by changes in the topology of the network D an administrative distance of 1 Answer: It is automatically updated and maintained by routing protocols.
Routing Information Protocol (RIP) and Interior Gateway Routing Protocol (IGRP) are two very popular Distance Vector routing protocols
Distance vector routing is used when the network is simple and has no hierarchical design. Examples of distance vector routing protocols are RIP and IGRP.
Distance vector protocols exchange their routing tables, and add a metric to each route. Link-state routing protols exchange topology information, then calculate the routes. As a result, there are the following fundamental differences:The information that is exchanged - routing table vs. topology information.Link-state protocols know the topology of the network (or an area); distance vector routing protocols don't.When the best route is calculated: in distance-vector routing protocols, a metric is added while the route is propagated from router to router. In link-state protocols, the best route is calculated separately by each router, only after having complete topology information.
Which two technologies can be used in distance vector routing protocols to prevent routing loops?
routers use routing protocols to exchange routing information. check out the link below for lots of information on routing protocols.
Two Characteristics: RIP is an example of distance vector routing protocols. Updates are periodic and include the entire routing table
Distance Vector protocols use the Bellmanâ??Ford algorithm. The ARPANET system relied on Distance Vector protocols as their main routing technique in the early 80s.
A routing protocol is a formula that specifies how routers are communicating to each others. Types of routing protocols include Interior Gateway Protocol, Distance vector protocol and Classful or classless protocol. Routing protocols are required to determine the appropriate paths for data transmission.