0
What else can I help you with?
If a Chevy 350 starter bolt busted How can you get it out?
You will need to DRILL it out and if you mess up the threads then you will need to retap the bolt hole.
Head bolt torque specs for 2003 Chevy Malibu?
I need head bolt torque specs and sequence on 2003 Chevy Malibu 3.1
Bolt size Chevy 350 short water pump?
the bolts are 3/8-16 . as for the length, all that is necessary is about 3/8 of an inch of bolt sticking through the pump, and gasket. a rule of thumb is the length of bolt you need to secure something ,is equal to the diameter of the bolt. that is besides the thickness of what ever you are securing , you should have a bolt at least the diameter of the bolt longer. example- if the pump is 1 inch thick, your bolt should be at least 1 3/8 inch long.
I need a factory manual for Chevy 350 4 bolt main?
eBay
Will a 400 transmission fit a 307 Chevy engine?
It has the same bolt pattern and it will bolt up but you will need the correct flexplate.
What is the wheel bolt pattern for a 88 Chevy s-10?
Can you purchse a lug bolt seperately.I don't want the pattern I need 1 bolt lug
Can you fit a 350 in a Buick centruy?
Depending on the year, a Buick Century may have been available with a small block Chevy, so yes, probably. If it had a Buick engine, you would need a transmission with the Chevy bolt pattern. There are different tail shaft lengths, so you would need to get the same length or modify the driveshaft.
What is the bolt size for a 97 Chevy cavalier starter?
The 1997 Chevy Cavalier starter bolt size is 9/16 by 3.5" inches long. You will need three starter bolts to secure the starter.
Will a Chevy New Process overdrive manual transmission from a 4x4 Chevy truck fit in a Chevy k5 blazer?
yes you can. pretty much every chevy trans has the same bolt patern. you will just need a transfer case that will bolt up with a passenger drop for the front axle.
What is bolt pattern for 1949 Chevy truck?
Need to know what model it is, 3100, 3600 or 3800.
Do you have a picture of a Chevy cavalier engine?
yes i do what picture do you need?? i need the head bolt pattern for a 2.2 liter engine
Is a 1988 Chevy k1500 with a 350 a 4 bolt or 2 bolt main?
If its a 1/2 ton it will be a 2- bolt main, You can run the engine # if you need to know for sure. But i'd bet its a 2-bolt
