It means that it is a six cylinder naturally-aspirated diesel engine with 125 mm piston bore
An engine housing boring, or line boring machine used to bore the block for main bearings of a crank, where straightness required inline with the each whole according to the crank size
This is a tool used to align the cleaning rod with the bore so that it doesn't rub against the sides of the bore when you pull the cleaning rod in and out. This prevents damaging the bore during cleaning.
The nominal bore of a pipe is its internal diameter. The nominal bore determines how much volume you have in the pipe to transport your particular substance.
what is the piston displacement of a compressor with 2" bore and 3" strokes
a 355 cid is only a 350 sbc with a .30 overbore to the piston. so a 350 c.i.d engine with a .30 bore makes it a 355 c.i.d. the c.i.d means cupic inch displacment
Bore it .030 over. A 350 has a 4 inch bore. When you go .030 over, the cid., becomes 355.
you have to bore out the cylinders .003 of an inch
4.030
it is a 30 over 350
355
355 cubic inches
what determines when should bore and engine
Its a 355 cubic inch
.355.
The Bore of an engine is the tube that the piston goes up and down in.
A 355 is just a 350 bored 0.030 over. There really is no difference. this is true but to further the answer if only you bore the cylenders out in the block you will need to buy aftermarket pistons to make up for the new wider space so you dont have compkications with the pistons slapping the cylender walls