answersLogoWhite

0

It means that it is a six cylinder naturally-aspirated diesel engine with 125 mm piston bore

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Mechanical Engineering

What is mean effective pressure in IC engine?

Mean effective pressure (mep ) is a parameter indicating a engine's performance, which is obtained by dividing mechanical work done in a cycle (W)by volume swept in a cycle (V). Clearly work is the product of pressure and volume or torque and angle. Since torque is a measurable quantity, the work per cycle can be calculated as W = T * 2pi ( 2 stroke engine), W = T * 4pi ( 4 stroke engine) therefore mep = W / V = T * 2pi / V or T * 4pi / V


Where is the engine size marked on the engine?

normal on the front face of the engine or the right hand side of the engine


What is mean by plunger diameter in diesel engine?

Plunger is used in diesel engine fuel injection system which meters the fuel into combustion chamber. Higher the plunger diameter, higher the fuel injected into the cylinder. The plunger diameter of a typical diesel engine could be 9-10mm. Cam disk is connected to the plunger and each revolution, plunger will diesel 4 times into the combustion chamber.


What is the engine of an old train?

The engine of an old train would be a steam engine.


When the engine order telegraph put the lever command to finished with engine?

Are you asking "What does the position 'Finished With Engine' mean?" If that is the question, the answer is simple. When a ship has been properly secured to a dock, or has anchored, the bridge will notify the engine room that they are done maneuvering and are "finished with engine". On a steam ship, steam is taken off the main turbines and vacuum is usually broken on the main condenser. The jacking gear is engaged and the turbines are allowed to cool down. On a diesel, fuel oil pumps are stopped, cooling water shut down, ect. In each case, the engines will not be immediately available if maneuvering must resume.