Want this question answered?
maybe 10 amperes
ARC VOLTAGE is the voltage that appears across the contacts of circuit breaker during the arcing period, during which the current flow is maintained in the form of an arc. The arc voltage value is low except for the point at which the current reaches zero when the arc voltage rises rapidly to a peak value.
"Air" and "Vacuum" describe how the breaker extinguishes the arcing current. An Air breaker opens far enough that the dielectric strenght of air is enough to extinguish the arc. A vacuum breaker's contacts are in a vacuum. Oil breakers use oil. SF6 breakers use SF6 gas to extinguish the arc.
No, bedroom lights fixtures do not have to be on arc fault breakers. In fact it is better if they are not. The neutral should return straight back to the distribution panel, for the arc fault circuit that the neutral is in. In some jurisdictions an electrical code amendment requires that the cable fed from arc fault breakers be identified with a blue outer sheath.
VCB is Vacuum Circuit Breaker. It is one of the type of Circuit breaker. In VCB arching chamber is vacuum instead of oil or such arc quenching media. Its function is to break the circuit automatically in case of fault or to isolate the circuit under normal situation also.
The proper ampere rating of a circuit breaker for an electric arc welder depends on the arc welder. Each is different. Look at the nameplate on the arc welder and choose the circuit breaker and wiring accordingly.
maybe 10 amperes
it welds
4500to6000 celsius
Like any mechanical tool, machine or similar engineering equipment, an arc welder will have lots of different materials inside it. An arc welder is an electrical machine and any electrical machine must have wiring inside it. Most electrical wiring will be made of Copper. So yes, there is likely to be some Copper inside an arc welder.
Stick welding is also more difficult to learn and use, particularly the ability to strike and maintain an arc. Arc welders are available in AC, DC or AC/DC, with AC being the most economical. It's used for welding thicker metals of 1/16 inch or greater.
s.m.a.w. shielded metal arc welding
10,000 Watts
That that would depend on what welder you are using. But most welders do have a arc that is brighter than the sun
You will need a 'step up transformer' but it is important to provide the details on the information panel of the welder before ordering
you could have a loose connection causing it to arc enough to trip the breaker -- check all the connections -- maybe you'll need to change out the arc fault you could have a loose connection causing it to arc enough to trip the breaker -- check all the connections -- maybe you'll need to change out the arc fault
It should be a 1947