no, the 89-92 engine/transmissions are different from the 93-97 ford probe.
between the engine and the drive wheels
the local salvage yard. They are also the same engine as the ford probe
The 2.5l 6 cylinder engine is the original engine in a 1994 ford probe gt and in the se and base it is a 2.0l 4 cylinder engine
The thermostat is located on the right side of the engine looking in, in between the intake manifold and the air filter box, underneath the wiring. This is in a 1994 Ford Probe GT 6 cylinder
Yessir, it will.
When standing in front and over the engine it is 'beside' the distributer.
Japanese Motor that is frequently engine swapped into a Ford Probe.
For the 1994, you have to remove the negative battery cable, then depress the brake and hold it in for 5 seconds to reset the check engine light.
It is connected to the starter.it is on the driver side of the engine at the back side.
its a Mazda engine . ( DOHC 4cyl. 16 valve 2.0l ) For the probe 1993
over 2000 !!!
Facing your engine, it is on the right side underneath the air intake filter assembly.
YES it is
what is the spark plug gap for an 1989 ford probe lx? Thank you.
just replace the engine with a 4 or 6 cylinder and your done.
under the hood, to the right near the firewall. it sits vertically.
The ford probe gt does not have a block heater block heaters are normally on a desiel Engine
The stock horsepower for a Ford 429 engine is 320. The Ford 429 engine was used on Ford vehicles made in the 1950s and 1960s.
The 1994 Ford Probe has a brake fluid reservoir that should be mounted on the drivers side firewall. Remove the cap on top to add fluid.
I want to know what is the proper spark plug gap for my car. It's a Ford Probe 1994, 4 cylinders and 2.0L
It is in the housing at the engine end of the upper rad hose. When replacing it make sure the spring on the thermostat is toward the engine.
Ask questions, submit answers, leave comments
Earn points for using the site
Customize your profile
Already have an account? Log in