There are three effects produced by an electric current:
The current measured at any point in a simple circuit will be the same because current is the measure of electron flow through a circuit. The current flowing through any branch of any circuit (or an entire simple circuit) will always be the same at any point.
Circuit breakers do not use anything, they are a controlling device. They can automatically open the circuit if the current exceeds the current rating and you can manually disconnect the power from the circuit.
No. Circuit is open but still HOT.
A battery, a light bulb and a switch
The simplest form of an electrical circuit is when an energy source (such as a battery) is connected to a load (such as a light bulb or a resistor). The connections must be made in such a way as to allow the energy to flow from the source, through the load and back into the source to form a loop.
increase
Ohms Law
A circuit needs at least three electrical contacs.
The current measured at any point in a simple circuit will be the same because current is the measure of electron flow through a circuit. The current flowing through any branch of any circuit (or an entire simple circuit) will always be the same at any point.
Electrical energy
When you switch off an electrical circuit you tend to create a 'break' in the circuit, preventing the electric current to flow around the circuit, this can be caused by a simple switch or a break in the circuit, e.g a disconnected wire.
depends on the simple circuit. please describe it.
you need an electrical supply and a load. nice and simple.
Well, it is light-thermal energy. Simple as that.AnswerI think that you are looking for 'series circuit', but your question is rather vague.
volts current ohms
An electrical circuit is a path which electrons from a voltage or current source flow. Electric current flows in a closed path called an electric circuit. The point where those electrons enter an electrical circuit is called the "source" of electrons. The point where the electrons leave an electrical circuit is called the "return" or "earth ground". The exit point is called the "return" because electrons always end up at the source when they complete the path of an electrical circuit. The part of an electrical circuit that is between the electrons' starting point and the point where they return to the source is called an electrical circuit's "load".Contents[hide] 1 Electrical-circuits2 Electronic circuits3 Circuit-and-wiring-diagrams4 Circuit-breakers5 Ground-fault-interrupt-(GFI)-devices6 Other websites
An electric circuit is a path in which electrons from a voltage or current source flow. Electric current flows in a closed path called an electric circuit. Its so simple, though my friend from extraminds help me with proper answer.