When you switch off an electrical circuit you tend to create a 'break' in the circuit, preventing the electric current to flow around the circuit, this can be caused by a simple switch or a break in the circuit, e.g a disconnected wire.
it is the natural commutation ...by making open circuit or short circuit on the thyristor to make it turn off.
Turn off the power!
A circuit of a series configuration.
because you are switch the hot leg, so it can be turn on an off.
There are two types of thermostats. One is a line voltage stat. This is in effect a switch and when turned to the off position the voltage is interrupted and the heater will not operate. The other type of stat is low voltage. There will be a relay in the baseboard heater that the thermostat is connected to. With this type if installation to turn the power completely off you will have to turn the breaker off that feeds the circuit.
A switch makes a physical break in the electric circuit. With the circuit broken the electricity can not flow. When the switch is turned the other way the circuit is completed and the current/electricity can flow.
f͚o͚r͚ e͚a͚s͚y͚ s͚w͚i͚t͚c͚h͚i͚n͚g͚ o͚f͚f͚ a͚n͚d͚ on
The circuit will stop working once turn off a flashlight.
When you turn your radio on and off, you are simply flicking the switch in the circuit, the same as any circuit with a switch in it. When you turn it on, the switch completes the circuit, and current can flow around the circuit.
When you turn your radio on and off, you are simply flicking the switch in the circuit, the same as any circuit with a switch in it. When you turn it on, the switch completes the circuit, and current can flow around the circuit.
When you turn It off it breaks the circuit. When it is turned on it closes the circuit. To have a light bulb turn on it need to have continuity. Hope that helps
In a lighting circuit an open circuit will turn off the light.
opening of circuit..
the function of the control device is that you can know if the circuit is on or off
If you turn off the electric current in the solenoid, the solenoid quits pulling its armature.
A lever is used to turn on a circuit A lever is also used to turn off a circuit
So you can turn it on... and you can turn it off...!