Blown fuses, melted wiring, computer damage,
hook the cables to the jump start posts, under the hood and plug the charger in.
PT Cruiser batteries can be jumped with jumper cables. When jumper cables are attached to the battery in the PT Cruiser and are attached to the battery and another car battery, the battery will get charged, after a few minutes.
Changing a battery on a 2006 PT Cruiser is very simple to do. The battery terminal cables will need to be taken off and put to the side. After the cables are off, take the battery off and replace it with a new one.
it will arch out and melt the knobs on your battery and your cables
As long as the cables are connected properly.
Yes. Especially if the cables are hooked up backwards.
Remove the battery cables for a couple of minutes.
The battery, on a 2010 Chrysler Limited Sebring, can be changed by first removing the battery cover. Remove the battery cables and the retaining bolt. The battery will left out. Reverse the process to install the new battery.
Remove air filter top cover, remove battery cables(neg. first) remove battery hold down.
Just unplug your battery cables and it resets the OBD computer. A
The computers reset themselves when the battery is unhooked.
Disconnect the car's battery cables, remove the spark plug cables and boot covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the boot covers and cables and reconnect the battery cables.