you can make the light bulb turn on. Ooh ooh i know. it's a circuit!
Make a circuit with 2 wires a batery and a light bulb and touch wire to medle on light bulb
the Sparks on the copper makes the wire on the light bulb makes the 9v light bulb turn on.
You need a Battery, Light Bulb, Ammeter, Switch.
It is called metal,plastic or steel so copper is also magnetic which alows the copper to make the bulb be brighter and to light up thankk you for listening...
The flow of electrons from the battery flow through the filament in the bulb causing it to get hot and glow thus producing light.
You need a Battery, Light Bulb, Ammeter, Switch.
no it will bloww
first of all, you need a bulb, a wire, and ONE light bulb. You clip the wire on the battery and touch the wire on the bottom of the light bulb
Get your bulb, it should be a very small wattage (weak) one, get your battery and wires, connect one wire to plus side of abttery and other wire to minus side of battery, then connect to the bulb, you may have to play around a bit to find a connection that produces light.
If it is a 1.5 volt bulb you can connect it through a series circuit directly to your battery. If the bulb is not made to run on 1.5 volts and needs another voltage, it may not light up!
Usually a higher voltage will make a light bulb shine brighter; but if the voltage is too high, this can also destroy the light bulb.
The things you need for your curcuit are: A light bulb, Bell wire, A Battery and a conducter ex. pin, paper clip Attach the bulb together with the battery using the bell wire. With the two ends of the wire connect to the conducter and see if light bulb comes on.