answersLogoWhite

0

first of all, you need a bulb, a wire, and ONE light bulb. You clip the wire on the battery and touch the wire on the bottom of the light bulb

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How is electricity transferred from batteries to the light bulb?

Electricity is passed through a wire from battery to bulb


What materials are needed to light a bulb in a circuit?

batteries, wire, connectors, and light bulbs


How do you make a battery light a light bulb?

Make a circuit with 2 wires a batery and a light bulb and touch wire to medle on light bulb


How can lemon make a bulb light?

the Sparks on the copper makes the wire on the light bulb makes the 9v light bulb turn on.


What can i make with a battery light bulb and copper wire?

you can make the light bulb turn on. Ooh ooh i know. it's a circuit!


How are batteries connected in a flashlight?

The electrons from the battery go through the wiring to the bulb. Inside the bulb, they heat a tungsten wire so hot that it glows, giving off light.


What components do you need to make a simple series light bulb?

You need a Battery, Light Bulb, Ammeter, Switch.


How do you make to make the perfect curcuit?

The things you need for your curcuit are: A light bulb, Bell wire, A Battery and a conducter ex. pin, paper clip Attach the bulb together with the battery using the bell wire. With the two ends of the wire connect to the conducter and see if light bulb comes on.


If you wired up the circuit with a bulb two batteries and a switch with a thin wire what will happen?

The circuit will likely overload the thin wire due to the higher current flowing from the batteries to the bulb. This can cause the wire to heat up and potentially melt or even start a fire. It's important to use wires that can handle the current in a circuit to prevent overheating and potential safety hazards.


What is the wire that gives off light in a light bulb?

In an incandescent light bulb the wire that gives off the light is called the Filament.


How do you connect a wire to make the bulb light?

To connect a wire to make a bulb light up, you need to complete an electric circuit. This involves connecting one end of the wire to the positive terminal of a power source (such as a battery) and the other end to the bulb's positive terminal. Then, connect the negative terminal of the battery to the negative terminal of the bulb to complete the circuit and allow electricity to flow, causing the bulb to light up.


Where does electricity come from inside a torch?

A tiny light bulb with a reflector is lit up with a battery. The switch connects the electric circuit; the power flows through the wire and the bulb lights up.Current through resistive filament of globe produces heat and light.Well first there's these two batteries inside it, then there's a wire inside it connecting it to the light bulb. then it makes one light bulb or more light by the energy of the battery. that makes the flashlight light. also there's a switch that connects a wire. if you pull the wire forward it will connect and make it light. but the opposite way makes the part of the switch go back and the light bulb won't light.