lock tight you can get it at any auto store or hardware store
Remove the bolts and apply Loc-tite or other brand of thread sealer. Reinstall. This should take of the bolts loosening. If you need to remove them later, you may need to apply heat to them.
loosening and tightening nuts and bolts
A wrench is a lever for tightening or loosening bolts .
loosen the alternator bolts to get that belt off and the other belt is loosened by loosening the power steering reservoir bolts.
The bolts on the far left above the garret cross
An adjustable wrench is an adjustable hand tool used for tightening and loosening nuts and bolts.
An adjustable spanner is an adjustable hand tool used for tightening and loosening nuts and bolts.
An adjustable wrench is an adjustable hand tool used for tightening and loosening nuts and bolts.
The center counsel on a 2007 Chrysler Sebring can be removed by loosening the bolts on the bottom of the Council. The bolts are located at the back of the Council.
The doors on a 1984 Chevy Silverado truck are adjusted by first loosening the retaining bolts. The door is then shifted into the desired position and the bolts re-tightened.
Start in the center and work you way outward, loosening them slowly. Keep working back and forth until they are all loose. Make about 3 passes before you loosen them all.
The alternator on a 92 Nissan Maxima is changed by disconnecting the wiring harness, loosening the retaining bolts, and removing the drive belt. The bolts can then be fully removed and the alternator swapped out.