Four 100 watt light bulbs or anything else that sums to 400 watts.
A inverter is what makes you be able to go from dc to AC. Usually a 400 watt inverter goes in a vehicle while a 5000 is typical for homes. If you wanted to use a laptop on electric only in your car... you would plug the inverter into the cig. lighter outlet in the car and your laptop into the inverter. Hope that helps!
One would assume the chainsaw requires 120 volts or more if you want to run it with an inverter. If your chainsaw uses 16 amps at 120 volts then your wattage is Volts (120) x Amps (16) and that would be 1920 watts. So you will require a much larger inverter to run your chainsaw.
All I can tell you is it doesn't work on a 2000Watt inverter with a 4000Watt surge. I made a video on how I tried to get it to work. Here is a link. I think you would need one with about a 10,000 watt surge.
Ues, a laptop with a 65 watt power adapter can be powered up with a 300 watt dc to ac inverter with 140 watt continuous operation with low voltage and overload protection
The inverter should supply at least 1 kW and if it is for extended use more than 4-5 minutes it should supply 1.5 kW.
A inverter is what makes you be able to go from dc to AC. Usually a 400 watt inverter goes in a vehicle while a 5000 is typical for homes. If you wanted to use a laptop on electric only in your car... you would plug the inverter into the cig. lighter outlet in the car and your laptop into the inverter. Hope that helps!
we can use 12 no's
A 1,000 watt inverter giving 110 volts is rated at 9 amps.
2/12volts batteries
How do you Winding of inverter 100 watt transformer?Read more: How_do_you_Winding_of_inverter_100_watt_transformer
Try this link ... a clear explanation with worked examples.www.majorpower.com/inverters/battery_sizing_faq.pdf
http://wiki.answers.com/Q/How_many_solar_panels_and_batteries_do_you_need_to_run_a_5000_watt_inverter"
No. The 12volts will not make a difference. The inverter converts the 12volts to 110/115volts. A 400watt inverter is not sufficient to run a power saw or any heavy power equipment like that. Laptops consume 20-50watts, while a coffee pot would consume more like 200-400watts. Your power equipment is a much heavier load, between 1000-4000watts depending on if it is a power saw or something larger. A basic 7 1/4 circular saw will use anywhere from 1000-2500 watts on starting and will draw a constant 800-1500 watts. Keep in mind it will draw more as you put it under load of cutting something, this will not run on a 400 watt inverter, let alone an 800 or 1000watt. You could however possibly run a power drill on that inverter, but otherwise no luck.
An inverter changes a d.c. input to an a.c. output. Inverter is a device to change low volt DC to high volt AC 12 Dc to 220 Ac volt So many type of inverter of watts 500 watt 1000 watt 5000 watt
Depends on the wattage of the cooler. 800 watts would be a small cooler I think. You need to check the cooler specification before connecting it to the inverter.
Most likely yes depending on your inverter and how long you run it. I have done it once before. I ran a sub woofer and a PA horn in my dad's work van for fun. Ran it for about a half hour. It was a 1000 watt inverter on a 700cca battery. The amplifier was bridged to 150 watts RMS. If you run more power you might need a bigger inverter. Out inverter also has circuitry that filters out noise.
One would assume the chainsaw requires 120 volts or more if you want to run it with an inverter. If your chainsaw uses 16 amps at 120 volts then your wattage is Volts (120) x Amps (16) and that would be 1920 watts. So you will require a much larger inverter to run your chainsaw.