Be very careful of what you do. There is supposed to be air space around the lamp. If this is blocked then enough heat can be generated by the bulb to catch the surrounding area on fire. Go to the home builders store and ask about zero clearance recessed fixtures before you do anything.
It is very good for making cans, but the inside should usually be coated (especially if the contents will be acidic) with a plastic film to prevent corrosion of the steel.
They paint the inside of some food cans so the food won't dissolve the can - tomatoes are a prime example; the inside of a can of tomato product is always painted white - but there's no need to put chemicals on the outside of a can to keep the food from going bad because the can itself does that.
Tin plated cans are not in use today. For other cans: - plastic or zinc plated steel cans: the time of degradation depends on the humidity of the environment, temperature, acidity of the soil or water, etc. Probably ten of years. - for aluminium cans the time of degradation is probably hundred of years
walmart
Tin cans are resistant to water.
Recessed Lighting Fixture Cans are manufactured to accept certain types of trim for the type of Recessed Rough in "Can". Check with the manufacturer of the recessed "can" to determine if the rough in "can" will accept the desired 3" light fixture. If not, then the existing 6" Recessed Lighting Fixture "Cans" will need to be removed and replaced with the 3" can in order to accept the desired trim. If the "cans" have been covered by the ceiling installed making them difficult to remove and replace the existing 6"cans and install the proper 3"cans, then you can purchase what is called old work or renovation Recessed Lighting Fixture cans and install them in place of the 6" cans. Some work to repair the ceiling would then be required.
No. If you will have insulation around a can, make sure it is thermally protected.
tin is used to protect the inside of metal cans
Yes, raccoons can certainly be inside trash cans. Raccoons are scavengers, so they are often found in trash cans searching for leftover food.
That would depend on the size of the cans.
To set-up for cans in a Dixie Narco, know the length of the cans to be vended. Then set the cans to its proper sizing. Settings are inside the vending machine.
Because inside it is rotting food.
the pressure difference, depends upon the can, and what it contains, in food cans, the pressure is equil, however in soda pop cans the pressure is higher on the inside
Yes, absolutely. As long as the LED bulb and incandescent bulb have the same base they will both fit the socket. The LED bulb will also run much cooler than the original incandescent bulb.
Tuna
Many small canneries in Alaska and Canada do not manufacture their own cans. Tapered cans are stacked inside each other to save space when shipping to the cannery.
cans, the food that is inside of the can, machines, the maker of the cans and food,and metal that is used for the can. there are probabally more but i dont know all of them! :)