It's possible that your fan may not be kicking on. To check if your fan is working on your car, turn your air conditioner on, your fan should come on at that time. If it does, you may need to look at your censors that control your fan. Also, make sure that you do not have any leaks in your hoses leading from your motor to your radiator. Hope this helps!
Have you checked your thermostat?
No. A leaking coolant pump is caused by a worn seal inside the pump. You will have to replace the pump.
Blew a gasket, radiator overheated or rusted out or stuck thermostat top 3.
You do not need to replace a water pump and thermostat at the same time. These parts do not ruin each other.
thermostat is located on engine block. follow top water hose leading to engine. thermostat is located inside the water intake. remove hose. remove water intake(two bolts)housing. replace thermostat. .
Drain the water from your 1997 GMC Yukon cooling system. Remove the water supply hose. Remove the thermostat housing retaining bolts. Remove the old thermostat and replace with the new thermostat.
Thermostat is located inside water outlet. You have remove the outlet if you want to replace the thermostat.
You can replace the thermostat on a C 15 Caterpillar diesel engine by removing the water hose. Next, remove the thermostat housing bolts. Reverse the process to install the new thermostat.
Your thermostat is possibly not opening up. Replace and flush and then recheck. Good luck.
You can replace the thermostat on your 2010 Chevy Impala 3.5 by removing the water hose and the 3 bolts from the thermostat housing. The thermostat will come right out. Reverse the process to install the new thermostat.
I would suspect the thermostat is the culprit. Replace the thermostat. definately replace the thermostat, get a new gasket and all. Also, start the car cold and see if the inlet hose to the radiator warms up evenly. if it gets really hot on the engine side of the hose and is still cool by the radiator that means that there is no flow and either the thermo is installed wrong or something is clogged
Have the heads and head gasket checked possible thermostat in backwards