what causes 2003 corvette headlight to not go down
get a new head light motor
Try disconnecting the vacumn hose under the hood and gently push down on the lamp door.
All you have to do is reach up under the bumper and there is a bracket on the back of the light that you push up and the headlight goes down.
Failed limit switch, or bad wiring. The motor will keep running until the headlight finds "home" ... ergo a failed limit switch as mentioned above. The sensor at the "home" position (headlight off) has to be tripped by the headlight assembly before the motor will shut down. The motor has no idea where the headlight physically is ... it keeps running until the switch is engaged.
underneath the steering column should be a knob that goes vertically up and down, if its down then the headlights will stay up by shutting the vacuum and if its up then the headlights will go down automatically when the light knob is pushed in.
hmm seems to me that the the light assembly mabye bent or that the sighn that the ,motor is on its way out Is there a stop switch?
The sensor that detects the position of the door may not be functioning properly once the door is closed.
There is a bolt with a torx bit head on it behind the headlight if i remember right there should be two of them one is for up and down the other is for in and out.
what could be pulling the battery down in a 1981 corvette
To let the top down on a 2001 Corvette you will need to go where the windshield meets and then, and then you would want to pull down all of the latches. This should let your 2001 Corvette top down.
== ==
I just replaced my headlight on my 2003 sx.2. There is only one adjustment and that is up and down. At the back of the assembly you will see a hole in which a screwdriver can be placed to turn an adjusting rod.