To disable the seat belt alarm on a Chevy Colorado, locate the alarm fuse. Pull out the fuse to disable the alarm.
The easiest way to disable the 1998 Chevy Lumina factory alarm is to remove the factory alarm fuse. The factory alarm fuse can be found in the fuse box.
The problem is in the alarm. If it is GM take it to the dealer.
Go to seat belt alarm stop.com
take it to a Chevy place
It is an alarm to alert someone or something that the power is no longer working.
pull fuse out in fuse box
It means it works Security alarm
On my 99 Suburban, the alarm activates when you press the lock button on the remote twice.
Try disconnecting and re-connecting the battery cable.
Try sledgehammering the battery.
You wear your seatbelt!
i have a 2004 Chevy Malibu i nedd to find the reset button please
alarm clock gets longer and longer
i does not have a control i need to replaced it
2001 chevy malibu alarm won't start
You first need to check the battery of your alarm system. Your alarm system may also be going bad and need to be replaced.
the remote has been lost and a new remote has been purchased. i had to remove the fuse to get the alarm to stop. how can i reset the alarm? So i can program the new remote.
If the warning lights come on when you start the car, but then go back off, there is no reason for alarm. However, if the lights stay on, or come on when you are driving you should probably stop driving as soon as you can and take the car to the mechanic.
Yes, pull the fuse.
make sure ALL the doors are closed
Turn the ignition switch to the auxiliary position. Do not start the engine. Leave the ignition switch in the auxiliary position for 30 seconds. This will reset your alarm system.
change the alternator batteries