0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What causes a random misfire on a 1996 s10?
Check condition of the plugs, could also be coil pack(s) going out, if ignition looks good check compression all cylinders
What would cause the random misfire on a 1996 Chevy 305 after you change plugs and wires as well as distributer cap and rotar?
The timing is off. it will need to be hooked up to a hand held computer system at a shop to correct this.
1996 Chevy Silverado with a P0306 engine code?
Trouble code P0306 means:Cylinder 6 misfire detected
What causes a 1996 Mazda b2300 pickup to misfire?
start with checking the coil packs wires sparkplugs
What is does it mean when the check engine light flashes and p0300 on a 1996 caprice?
P0300 is a random cylinder misfire. Ensure engine is properly tuned.
1996 Chevy cavalier Z-24 and when you scan the codes reads misfire on cylinder 3 what do I do?
I had that happen n I changed my plugs n coil pack...easy to do
What causes 1996 Mazda millenia to misfire on cylinder 1?
Start with a bad Spark Wire Followd by a new Distributor Cap and Rotor button. Pening that failure, replace the sparks.
1996 4.3 vortec v6 misfire and vibration?
Several things can cause your 1996 4.3 liter V-6 engine to misfire and have a vibration. A bad fuel injector is the most common cause.
What causes a 3800 engine to shake real bad in a 1996 Chevy Camaro?
Try checking your engine mounts and bolts. On my Engine was it a misfire condition,the sparkplugwire from cyl #6 came loose I have a 96 Camaro RS 3.8 L.The other time it was a small Vac Line by the Throttle body,that caused a bad shake
What causes a 1996 eclipse to sputter and idle rough?
A lot depends on when it is sputtering. Is it hesitating under acceleration? That is what happens most commonly in eclipses. It is probably a misfire in one of the cylinders. Change your plugs and wires.
What causes engine misfire and loss of power on allcylinders. 1996 dodge ram 1500 with 318 Changed coilplugswires airfilter ob says random cylinder misfire?
Misfire can be caused by many different types of problems with your valves. It could be burned or leaking valves, carbon build up on the valves, weak or broken valve springs, worn valve guides or lifters, broken worn or bent rocker arms or pushrods, worn camshafts, improper valve timing, or worn pistons or rings. A misfire is basically when the cylinder is not producing enough air-fuel mixture properly, so your valves may not be supplying the proper amount of air into the cylinder, for the compression to be strong enough for combustion.
What causes a misfire on cylinder 3 in a 1996 blazer I have changed the plug wires egr valve cap and rotor. Any help?
It could be out of time. It could be connected to the wrong plug in on the distributor. Check your wires for breaks in them.
