Bad light bulbs.... Replace them...
check fuses with test light under dash
You need to replace your head light switchRutifo
The button on your dashboard
The blinking red light in the dashboard is an indicator that your anti-theft security system is armed and working.
See related question below.
What causes the dashboard light to stay on after your car has been turned off? 1994 Buick Century.
The check gauges light comes on when one of the gauges it outside of the safe operating range. Check oil pressure, coolant temp, battery voltage, etc.
The check gauges light means that one of the gauges is out of the safe range.
most times it's becauce your tail lights are not working. most auto makers do that to alert you that your tail lights are not woking.
When one of your gauges shows something abnormal, your "check gauges" light will come one. Chances are you're low on motor oil. When you corner, the oil will slosh away from the pickup, causing your oil pressure gauge to read zero for a second. This in turn causes your check gauges light to come on, but by the time you look at your gauges, the oil has settled in the pan is your oil pressure is reading normal again. When you see the check gauges light and the gauges are reading fine, check your oil.
The dash light brightness control may be turned off, check the switch.
It could, you need to have the codes checked to know possible causes.
Look in your car manual and it will tell you what each symbol means. For example, check gauges light could be low on gas or oil.
Paradise by the Dashboard Light was created in 1976.
The check gauges light stays on when one of the gauges is out of the safe or normal range.
Engine overheat, low oil pressure, or alternator voltage.
You'd have to change the entire gauge cluster. IE the tachometer and speedometer. The light bulb is a white light, and the gauges are colored red so in order to change the color of the gauges youd have to buy a custom made cluster. You'd have to change the entire gauge cluster. IE the tachometer and speedometer. The light bulb is a white light, and the gauges are colored red so in order to change the color of the gauges youd have to buy a custom made cluster.
The check gauges light is on when one of the gauges is out of the safe zone. It could be overheating, not charging, or no oil pressure.
When the check gauges light comes on it is telling you to check the gauges because at least one of the gauges is out of normal range. It could be low oil pressure, engine over heating or low voltage.
Check the gauges. One or more of the gauges must be out of normal range to trip the "check gauges" light.
My older Blazer has a 'check engine' light and also a 'check gauges' light. When the 'check gauges' light is on, check your other gauges like the temp and volt gauges. One of them may be showing something different than normal.
How do you reset dashboard brake light on vw passat