Depending on the yr. of the explorer, you may have an A4LD transmission. These were known for similar problems if you have not change your filter and fluid I would do that first, is makes no difference what yr. your vehicle is this is always wise to do and may fix your problem. There are other things that can cause this type of problem.
6000
because you are engaging the clutch which cuts out the engine for a smooth gear change
On a 1998 Ford Explorer, Overdrive Band Failed Off means that the vehicle did not shift into Overdrive properly. The band for this gear should be serviced soon.
sounds like your brakes are not releasing properly
it wont change gear properly. if at all,,, because of the oil thickness
A bad governor gear or the throttle valve linkage is not adjusted properly.
your syncronizers in the transmission are worn out in 5th gear. there what make the gears line up in speed so you can change them smoothly
Depending on your transmission, assuming it is a gear drive and not hyrdo, the brakes could be locked on the unit, or it could be hung in gear, are you able to change gears using the gear shift ???
Mechanical failures causes incorrect gear ratio in the VW Touareg. Lots of torque is what causes the incorrect gear ratio in VW Touareg.
The simplest case: you need to add/change transmission fluid. The hardest case: you have to change transmission.
Check the gear switch it is located on the dashboard. You should have it set to auto; if it is set to Hi or Lo the gear light will be on. --------------------------------------------- actually , if the lights are flashing a malfunction has been detected , get it checked out
the purpose of a quick change gear box (as the name suggests) is to allow you to change gear quickly.